Sony DSR-30 Assemble editing (continued)

Assemble editing (continued)	7 Press START / PAUSE.
	The whole screen appears and assemble editing starts.
	When editing ends, this VCR is set to recording pause and the
	screen in step 6 reappears.

Note

The recording does not stop the moment you press pto stop editing. The source picture may be recorded a little longer than you expected.

To assemble edit more than 10 events

1Press ASSEMBLE.

The assemble editing mode is canceled, and the IN/OUT points stored in memory are erased.

2Repeat steps 2 to 7.

To stop assemble editing

To stop while editing, press START/PAUSE.

This VCR is set to recording pause, and you can check the events or change the recording starting point.

When you press START/PAUSE again, editing restarts from the first event.

To end assemble editing

Press ASSEMBLE.

All the IN/OUT points are erased.

44 EN Editing