Connecting other equipment

For usage, connections, etc., refer to the instruction manual of the equipment to be connected.

Connecting an editing controller

•When using this VCR as a recorder or as a player, set the LANC MODE on this VCR to “S.”

•If the controller has a shuttle mode, set it to “B.”

•When you edit tapes using video/audio code and connecting an editing controller RM-E1000T to this VCR (recorder), set the “SEARCH” in the menu of RM-E1000T to “FF/REW.”

Connecting a titler and a digital SEG

•When using this VCR as a player, set “AUTO DISPLAY” on the SET UP MENU to “OFF.”

•When connecting a titler and a digital SEG equipped with the S VIDEO jack, use the S VIDEO connection.

Connecting a still picture capture board kit

• Set the LANC MODE on this VCR to “S.”

Connecting a Video Printer equipped with a LANC jack.

• Set the LANC MODE on this VCR to “S.”

Making a tape duplication system by connecting a number of DSR-30/30P units

•Make sure to use an audio/video distributor. If you make a loop connection, picture and sound may deteriorate.

•When using a CONTROL S jack, you can make a loop-through connection. Check the commander mode of the wired remote commander and set the same mode on this VCR. (page 17)

•For details on a wired remote commander, consult the shop where you purchased it.

You cannot use the following remote commanders with this VCR: SVRM-100, RM-250, RM-S18 and RM-S52A.

50 EN Editing