ClipLink Operation Flow
Time codes recorded for Mark IN/OUT pointsThere is a gap between actual time codes and Mark IN/ OUT time codes recorded in the cassette memory, as shown in the figure below. The frame digit is incremented at each Mark IN point and is decremented at each Mark OUT point.
| Mark IN |
|
| Mark OUT | |||
| (or Rec IN) | Cue | (or Rec OUT) | ||||
Actual time code | 12:23:15:10 | 12:34:20:20 | 12:39:24:23 |
| |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Frame digit |
|
|
| Frame digit | |
|
|
|
|
| |||
|
| incremented |
|
|
| decremented | |
|
|
|
|
|
| Cue | |
Time code |
|
|
|
|
|
|
|
12:23:16 | 12:34:20:20 | 12:39:24 |
| ||||
recorded in the |
|
cassette memory
(The Index Picture is the image around 12:23:15:10.)
Recording capacity for Mark IN/OUT time codes and Cue point time codesWhen in MARK mode, up to 198 pairs of Mark IN and Mark OUT points can be recorded (if using a cassette with 16 Kbits of cassette memory).
When in CUE mode, up to 396 time codes points (including all cue point time codes and all Mark (Rec) IN and Mark (Rec) OUT time codes) can be recorded (if using a cassette with 16 Kbits of cassette memory).
Appendix
140 Appendix