Power Supply
The following power supplies can be used with the camcorder.
•AC power (The
Alternatively, you can make combined use of internal and external batteries, by mounting one of the above batteries as an internal battery and connecting an external battery that can be a
Connections and Fitting 2 Chapter
With a battery pack, the camcorder will operate continuously for the time shown below.
Before use, charge the battery pack with a
Notes on using the battery pack
•A warm battery pack may not be able to be fully recharged.
•Even when fully charged, battery packs gradually lose their charge naturally. Use the battery packs as soon as possible after recharging.
•To prolong the life of battery packs, store them in a cool place (about 20°C (68°F)), and charge in a place with an ambient temperature between 10°C and 30°C (50°F to 86°F).
•Before
•It is recommended that the
•At low temperatures, the usable time of battery packs decreases. When the ambient temperature is 0°C (32°F), usable time decreases by about 10%. (However, the usable time is affected by the power consumption of the connected camcorder and the usage status of the battery packs.) The usable time of battery packs increases if they are warmed to the room temperature (about 20°C (68°F)) before use at low temperatures.
•If you use the
•Compared to the
•Carrying a spare battery pack is recommended.
The
1 Press the battery pack against
the rear of the camcorder, aligning the side line of the battery pack with the line on the camcorder.
Align these lines.
46 | Chapter 2 Fitting and Connections |