Load the cassette that contains the recorded files.
1 Set the SETUP switch to FILE.
2 Access advanced menu page 10.
mPAGE10(NEXTm$ PREVm4)
FILE RECALL FILE:*HISAT SELECT FILE
HISAT
CHG FILE (YESmPUSH)
EXIT MENU (YESmPUSH)
5 Press the MENU dial to call up the file. To abort the call up operation, press the MENU switch (the display returns to the one shown in step 3).
During the call up operation, the following display appears.
PAGE10(NEXTm$ PREVm4)
FILE RECALL
FILE:*HISAT
SELECT FILE
TAPE
SETUP FILE: USER2
EXIT MENU (YESmPUSH)
3 Move the cursor to SELECT FILE with the MENU switch and move the MENU dial to select TAPE.
When the call up operation ends, the display changes as shown below.
PAGE10(NEXTm$ PREVm4)
FILE RECALL FILE:*HISAT mSELECT FILE
TAPE CHG FILE
(YESmPUSH)
EXIT MENU (YESmPUSH)
PAGE10(NEXTm$ PREVm4)
FILE RECALL FILE: USER2
SELECT FILE USER2
mCHG FILE DONE
EXIT MENU (YESmPUSH)
Name of file recorded onto tape
4 Chapter
4 Move the cursor to CHG FILE and press the MENU dial.
The screen appears as shown below.
PAGE10(NEXTm$ PREVm4)
FILE RECALL FILE:*HISAT SELECT FILE
TAPE mREADY TAPE
(YESmPUSH)
EXIT MENU (YESmPUSH)
The settings of the camcorder are now replaced by the settings in the called file.
Menus and Indications Screen Viewfinder
Chapter 4 Viewfinder Screen Indications and Menus 95