
1 Set the POWER switch to ON and check the following items in the display window.
Item to check | Indication and steps | See also | ||
|
|
| ||
How is the battery? | BATT E [xxxxxx] F: The battery is fully charged. | “8 Display window” (page 16) | ||
| If two or fewer marks xappear and the indication is blinking, |
| ||
| replace the battery. |
| ||
|
|
|
|
|
Has the lithium battery | Make sure that the |
| is not shown in the display window. | “Inserting and Replacing the |
Li | ||||
been inserted and is it | If it is shown, replace |
| the lithium battery. | Lithium Battery” (page 31) |
charged? |
|
|
|
|
|
|
| ||
Is there a condensation | Make sure that the “HUMID” indication is not shown in the | “Condensation” (page 128) | ||
problem? | display window. If it is shown, do not use the equipment until |
| ||
| the “HUMID” indication disappears. |
| ||
|
|
|
|
|
2 Press the EJECT button to open the cassette holder, and insert the cassette.
Make sure that the cassette’s REC/SAVE switch is set to REC, then check for tape slack before loading the cassette.
For details on handling cassettes, see “Cassettes for the
PUSH
Indication “PUSH”
Cassette holder window
Insert the cassette with the cassette window (on the front) facing outward.
Stage
PUSH
Indication “PUSH”
Cassette holder window
Guides
Lock
Insert the cassette with the cassette window (on the front) facing outward. Push the cassette between the both guides along the stage until it goes under the lock.
Press on “ PUSH” on the cassette holder solidly to close the holder.
Shooting 3 Chapter
(Continued)
Chapter 3 Shooting 53