Using Accessories

Using the RM-LG1 Remote Control Unit

You can control the camcorder using the supplied RM-LG1 Remote Control Unit.

2 Chapter

Location and Function of Parts

1 Cable with mini-plug

4Velcro

When using the unit on the panning rod of the tripod, this is used to attach the unit to the panning rod mounting bracket (supplied with RM-LG1).

5Cable clamp groove

When the cable 1 is passed underneath the unit, the cable can be placed in this groove.

and Fitting

1

2 Switches 1 and 2

2

4 Velcro

Attaching the RM-LG1

Connections

3 Switch name

5 Cable clamp

displays

groove

 

1Cable with mini-plug

Connect to the REMOTE connector 1 (5 on page 23) on the DSR-500WSL/500WSPL.

2 Switches 1 and 2

You can assign functions to these switches using the advanced menu page 3 (see page 88) of the DSR- 500WSL/500WSPL.

Each can be used as the following types of switch: VTR switch, MARK switch, CUE switch, or NG switch.

At the shipping of the DSR-500WSL/500WSPL, switch 1 is set as the VTR switch and switch 2 is set as the MARK switch.

For information about the advanced menu and function of each switch, see “Location and Function of Parts” on page 12 and “Viewfinder Advanced Menu” on page 86.

Use the binding ties and panning rod mounting bracket to attach the unit to a panning rod.

Panning rod mounting bracket

Velcro

Binding ties

Panning

 

rod

 

Removing the RM-LG1

Lift up the tab to loosen the binding ties.

3Switch name displays

Stickers (supplied with RM-LG1) can be attached here to indicate which functions are assigned to the switches 1 and 2 2.

42

Chapter 2 Fitting and Connections