
Note |
| in accordance with the aspect ratio selected on the |
You can switch the scan size of the | camera or camcorder. |
1 Chapter
1Eyepiece focusing knob
2Stopper
Microphone holding screw
Microphone holder
Microphone
3LIGHT switch and light
HIGH LOW OFF
LIGHT
4 TAKE/TALLY indicator
TALLY
TAKE REC BATT
5 BATT indicator
6 REC/TALLY indicators
7 GAIN UP indicator
SHUTTER | GAIN UP |
8 SHUTTER indicator
Eye cup
9PEAKING control
0CONTRAST control
qa Tally lamp
qs BRIGHT control
qd Eyepiece release catch
qf TALLY switch
qg DISPLAY switch
qh Viewfinder connector
Overview
Turn this to adjust the viewfinder focus to match your eyesight. (See page 118.)
2StopperLift up when detaching the viewfinder (See page 34).
3LIGHT switch and lightThe light lights the lens and the switch controls the light as follows.
HIGH/LOW: Turn the light on and control the brightness.
OFF: Turns the light off.
When using the ClipLink function while shooting, this indicator lights when the TAKE button (6 on page
12)has been pressed to set a Mark IN point and goes out when a Mark OUT point is set.
5BATT (battery) indicator (red)This indicates when the battery capacity is low.
Chapter 1 Overview 29