Basic menu page 2
mSKIN DTL: OFF DL LEV : STD PRE WHT : 3200
Item | Settings |
|
|
SKIN DTL | 0.0 to 0.5 (normal value) to 1.0 |
Sets the amount of | Smaller values set a softer skin detail. |
skin detail |
|
correction. |
|
|
|
DL LEV | LOW, STD (normal value), HIGH |
Sets the | Set the amount of DynaLatitude |
DynaLatitude level. | effects as high level, standard level |
| (STD), or low level. |
|
|
PRE WHT | When the filter is 3200 or CROSS: |
Sets the color | 2200 to 3200 (normal value) to 4300, |
temperature of the | filter 5600K, 5600K + 1/8ND |
preset white | When the filter is 5600K + 1/64ND: |
balance. | 4600 to 5600 (normal value) to 12000 |
|
|
Basic menu page 3
This is displayed when the SETUP switch has been set to FILE.
FILE:*FL mSELECT FILE
HISAT
CHG FILE (YESmPUSH)
For details of this operation, see “Setup Files” (page 94).
Item | Settings | |
|
| |
VIDEO | CAM (normal value) | |
IN | Records the signal shot by this camcorder. | |
Selects | EXT | |
the | ||
Records the signal input from the GEN LOCK IN/ | ||
signal | ||
VIDEO IN connector. The image on the | ||
to be | ||
viewfinder and the signal output from the | ||
recorded | ||
MONITOR OUT connector are switched to the | ||
onto the | external video signal. When inputting the external | |
internal | video signal, “EXT INPUT” blinks on the screen. | |
VCR. | ||
|
EXT INPUT
If you set VIDEO IN to EXT and input the external VBS signal from the GEN LOCK IN connector, the image in the viewfinder and the signal output from the MONITOR OUT connector are switched to the external video signal. When inputting the external video signal,
“ EXT INPUT” always blinks on the screen.
Notes
•When VIDEO IN is set to EXT, the video signals are not output from the S VIDEO OUT connector.
•When VIDEO IN is set to EXT, the basic menu page 5 is not displayed.
Basic menu page 5
This menu is displayed when CAM is selected on the basic menu page 4 and an external sync signal is input to the GEN LOCK IN connector.
mSC PHASE: 000
HPHASE: 135
Menus and Indications Screen Viewfinder 4 Chapter
Basic menu page 4
This is displayed when the optional
mVIDEO IN: CAM
Item | Settings |
SC PHASE | 000 to 999 |
Sub carrier phase adjustment for |
|
when the camcorder is genlocked.a) |
|
H PHASE | 000 to 135 (normal value) |
Horizontal phase adjustment for | to 199 |
when the camcorder is genlocked.a) |
|
a)This applies when using an external sync signal to synchronize operation of several camcorders (see page 44).
Chapter 4 Viewfinder Screen Indications and Menus 81