Power SupplyUsing an AC AdaptorUsing a CMA-8A/8ACE AC Adaptor

Connect the camcorder to the AC power supply as shown in the following figure, and turn the POWER switch of the CMA-8A/8ACE to ON.

Chapter

To AC power source

 

2

CMA-8A/8ACE

AC Adaptor

Fitting

POWER switch: ON

and

CCQX-3 cable

Connections

CAMERA/CCU

 

 

DC IN

Using an AC-DN1/DN2A AC Adaptor

Mount the AC-DN1/DN2A on the camcorder in the same way as a battery, then connect to the AC power source.

To AC power source

Note

When power consumption of the camcorder and accessories is 38 W or higher, use the AC-DN2A AC adaptor (lower than 150 W).

Using the Anton BauerIntelligent Battery System

You can equip the camcorder with a special battery mount which the Anton Bauer Corporation has developed for its Intelligent Battery System and Ultralight System.

When the camcorder is used with an Anton Bauer Digital Magnum series battery, the remaining battery capacity is shown numerically in the viewfinder display.

Contact your Sony dealer for more information.

48

Chapter 2 Fitting and Connections