aLevel vial
kMeasure hook/focus reference mark
bL handle
cAccessory pockets
| GENLOCK IN |
|
|
|
| TEST OUT |
|
|
|
| MONITOR HD |
|
|
|
| SDI 1 |
|
|
|
| MONITOR HD |
|
|
|
| SDI 2 |
|
|
|
dDC IN connector | 12V | OFF | EXT I/O | 12V 4A 24V 5.5A |
CA | ON |
| ||
DC IN |
|
|
| |
| 24V |
|
| DC OUT |
jDC OUT 24V connector
iDC OUT 12V connector
h (network) connector
gEXT I/O connector
fCAM POWER switch
ePower indicators
Overview 1 Chapter
Used as a reference to check that the camera stands horizontally. It can be
If
It has three screw holes (3/8") for accessories on the upper side. The assistant panel (page 15) can be mounted on the outside of the handle by attaching the supplied assistant panel hanger.
Using these accessory pockets in combination with the accessory receptacles (page 10) on the front panel, you can fix a certain accessory to the left side of the camera.
dDC IN connector (LEMOEither of the indicators lights according to the voltage of the power being supplied.
fCAM POWER switchCA: The camera is turned on using the power being supplied via the interface box (page 15).
OFF: The power is cut off.ON: The camera is turned on using the power being supplied from the DC IN connector of the camera head.
Note
If you move the switch setting from ON to CA in one stroke, the power may not be cut off. To turn off the power, be sure to set the switch to the OFF position.
gEXT I/O (external control) connectorLocations and Functions of Parts | 11 |
|
|