2-6 Attaching/Detaching Handles
2-6-1 L Handle
The L handle is attached to the top of the camera head at the factory.
Three screw holes (for 3/8” camera screws for a tripod) on the upper side of the L handle can be used for fixing various accessories.
Mounting the assistant panelBy attaching the supplied assistant panel hanger, you can mount the assistant panel on the outside of the handle.
Assistant panel hanger (supplied)
four +B4×8 screws (supplied)
Assistant panel
OFRFUONN
|
| OCK IN |
| GENL | |
2 | TEST | OUT |
| ||
|
|
If the L handle is not necessary or to be replaced with the supplied center handle, remove it by loosening the two screws, using the
OFRFUONN
|
| OCK IN |
| GENL | |
2 | TEST | OUT |
|
|
Hexagonal screws
To attach the handle in the original position, reverse the | Chapter | |
procedure for detaching. | 2 | |
Installation | ||
| ||
and | ||
| ||
The supplied center handle can be attached to the top or | Preparations | |
| ||
rear of the camera head. |
| |
Attach it so that the slanting side faces the back (or |
| |
bottom). |
| |
The screw holes on the upper side of the handle can be used |
| |
for fixing various accessories. |
| |
Attaching the handle directly to the camera |
| |
head |
| |
The handle can be attached/detached in the same manner |
| |
as the interface box (see page 17). |
| |
Attaching the handle to the interface box |
| |
mounted on the camera head |
| |
First remove the base plate from the handle by loosening |
| |
the four screws, then attach it to the interface box. |
|
Center handle
1 2
Base plate | LOCK |
|
DC IN | |
|
Interface box
Attaching/Detaching Handles | 23 |
|
|