Settings and Adjustments Basic 3 Chapter
Item | Setting | Content |
PB | RIGHT | With HOR, the playback picture |
POSITION |
| is displayed on the right and the |
|
| camera image on the left. |
|
| (Default when HOR is selected) |
|
|
|
| LEFT | With HOR, the playback picture |
|
| is displayed on the left and the |
|
| camera image on the right. |
|
|
|
| BOTTOM | With VERT, the playback picture |
|
| is displayed in the lower part |
|
| and the camera image in the |
|
| upper part. (Default when VERT |
|
| is selected) |
|
|
|
| TOP | With VERT, the playback picture |
|
| is displayed in the upper part |
|
| and the camera image in the |
|
| lower part. |
|
|
|
BOUNDARY | With HOR: | The boundary position can be |
| changed. (Default: with HOR: | |
| With VERT: | 960, with VERT: 540) |
|
| |
|
|
|
1)The VBS output signal always becomes the camera image to which ITU- R709 gamma is applied.
2)With fixed gamma, the Detail settings for the main line are not applied. The fixed pedestal and knee levels are applied.
When power saving is not activated for VBS, S23.98PsF/23.98PsF is pulled down to 59.94i and S24PsF/24PsF is pulled down to 50i then output, so that the camera image can be displayed on the viewfinder or a monitor that does not support 23.98PsF/24PsF.
3)When MONI GAMMA ENABLE is set to OFF, the same gamma as that applied to the main line is applied to all the outputs. However, the PB and PB MIX modes can be independently selected for the VF, MONI, and VBS signals.
3-5-3 Outputting Color Bars
The
The
<OTHERS 1> | U21 | |
FAN | MODE | : AUTO1 |
CAM | BARS | :BON |
IMAGE INVERT | : OFF |
REMOTE connectors if fixed gamma (R709) is selected for MONITOR GAMMA of the respective output on the <PB/MONI GAMMA> page (except when a VBS signal is output).
When CAM BARS is set to ON, the
Note
The
38 | Setting the Camera Outputs |
|
|