Sony F23 MIX, WIPE, PB MIX, MIX TYPE, MONI GAMMA ENABLE, <PB MIX SETTING> page, To monitor the playback picture, To apply fixed gamma to the monitor picture

To apply fixed gamma to the monitor pictureMONI GAMMA ENABLE

If this is set to ON, fixed gamma (ITU-R709) appropriate for monitoring1) is applied to the video signals output from the VF1, VF2, MONITOR OUT HD SDI 1/2, or REMOTE connector. The video output signals from those connectors are selected on the <MONITOR OUTPUT> page.

This setting is effective when S-LOG gamma is applied to the video output signals for recording intended for post- production editing.2)

To monitor the playback picture

The playback picture of the recorder can be confirmed with a monitor connected to the camera or on the viewfinder screen.3)

PB

The playback-signal output mode can be selected for each VF, MONI, or VBS signal.

Setting	Signal
ON	The playback picture of the recorder is always
	output.
AUTO	Normally, the camera image is output. When
	the recorder enters playback mode (PLAY, FF,
	REW, or REC REVIEW,) the playback picture
	is automatically selected.
OFF	The camera image is always output. (Default)

Note

If the recorder is turned off with PB ON, the picture on the viewfinder/monitor screen is distorted. The normal picture is restored by turning the recorder on or setting PB to AUTO or OFF.

To compare the playback picture and camera image

The playback picture and camera image can be displayed on the same screen when the playback-signal output mode is set to ON or AUTO for the item PB on the <PB/MONI GAMMA> page and if PB MIX is set to ON.

PB MIX

The playback-signal mix mode can be independently set to ON or OFF for each VF, MONI, or VBS signal. When set to ON, the playback picture and camera image are mixed.

How this is to be displayed can be set on the <PB MIX SETTING> page of the USER (OPERATION) menu.

<PB MIX SETTING> page

<PB	MIX	SETTING> U10
MIX	TYPE	:BMIX
MIX

DIRECTION	:	PB
MODE	:	Y-MIX
LEVEL	:	80%
WIPE
LAYOUT	: HOR
PB POSITION	: RIGHT
BOUNDARY	:	960

MIX TYPEHow the picture is to be displayed can be selected.

Setting	How to display
MIX	The playback picture and camera image are
	overlapped. (Default)
WIPE	The screen is horizontally or vertically split in
	two, and two pictures are displayed
	simultaneously.

MIXWhen MIX TYPE is set to MIX, how to mix the pictures can be selected.

Item	Setting	Content
DIRECTION	CAM	The playback picture is gradually
		mixed into the camera image.
		(Default)
	PB	The camera image is gradually
		mixed into the playback picture.
MODE	Y-MIX	The Y signals are mixed. (Default)
	WIRE(W)	Only the outline components are
		mixed and displayed with white
		lines.
	WIRE(B)	Only the outline components are
		mixed and displayed with black
		lines.
LEVEL	0 to 80%	The mix level can be adjusted.
		(Default: 80%)

WIPEWhen MIX TYPE is set to WIPE, how pictures are to be wiped can be selected.

Item	Setting	Content
LAYOUT	HOR	Horizontally split (Default)
	VERT	Vertically split

Settings and Adjustments Basic 3 Chapter

Setting the Camera Outputs 37