Settings and Adjustments Basic 3 Chapter

<OUTPUT FORMAT> page of MAINTENANCE menu

<OUTPUT

FORMAT>

M07 TOP

CURRENT

23.98PsF

4:4:4

NEXT

 

 

 

SCAN

:cPROGRESSIVE

FRAME

: 23

.98

 

SIGNAL

: 4:4:4

RGB

SELECT

FPS: OFF

 

SET

RORMAT

 

 

 

 

 

 

CURRENT

The current format is displayed.

Specify the desired format, using the lines under NEXT.

SCAN

Select the scan mode: PROGRESSIVE or INTERLACE.

FRAME

Select the frame rate. When you select INTERLACE for the scan mode, select 29.97 to specify 59.94I or select 25 to specify 50I.

SIGNAL

Select the signal format.

SELECT FPS

Set to ON to use the Select FPS function.

For details on the Select FPS function, refer to the Operation Manual of the SRW-1 HD Portable Digital Recorder.

When the settings are completed, position the pointer at SET FORMAT and push on the MENU SEL/ENTER dial. The format is changed, and the new format is displayed on the CURRENT line.

Notes

•If you select the format in invalid combination (e.g., 60P and 4:4:4), SET FORMAT is displayed in parentheses, and the format cannot be changed.

•If the recorder refuses the format change by the above procedure, the message “UNSUPPORTED FORMAT” is displayed for three seconds.

50

Detailed Setting of the Video Format