1-3-2 Assistant Panel (Supplied)
The most parts are common to those on the right panel of the camera head. Connecting the panel to the CONTROL PANEL connector (page 10) of the camera head permits the camera and recorder to be operated at hand.
aCAMERA connector LOCK switch
VF MENU/DISPLAY button
Assignable buttons 1, 2, 3
CANCEL/STATUS button
bAUX connector
LOCK | VF MENU/DISPLAY CANCEL/STATUS |
MENU SEL/
ENTER
RUN
4
AUTO
BLK BAL
PAGE SET
MENU SEL/ENTER dial
Subdisplay
SET button
PAGE button
4/AUTO BLK BAL switch
RUN button and indicator
aCAMERA connectorUsing the supplied assistant panel cable, connect to the CONTROL PANEL connector of the camera head.
bAUX (auxiliary) connectorConnect to an external device as required.The other parts function the same as those on the right side panel of the camera head.
Note
If the assistant panel cable is disconnected/connected while you are operating the subdisplay or a menu on the viewfinder/monitor screen, the cursor/pointer on the subdisplay or on the menu page may inadvertently be moved. If a ? symbol is shown on the display, first register the setting, then disconnect/connect the cable.
1-3-3 Interface Box (Supplied)
Being attached to the top or the rear of the camera head, it transfers signals and power to/from the camera head.
aAUDIO IN
bAudio input selection switches
LINE | MIC |
+48V ON | |
| |
| IN |
LINE | +48V ONAUDIO |
MIC | |
|
eCamera connector 1
A
B | |
|
fCamera connector 2
dDC IN connector (bottom)
c
Connect audio signals. Each connector is equipped with an input selection switch.
bAudio input selection switchesSet to the appropriate position according to the equipment connected to the corresponding AUDIO IN connector. LINE: When a
Connecting the
Note
Power is not fed to anOverview 1 Chapter
Locations and Functions of Parts | 15 |
|
|