Overview 1 Chapter

The necessary settings are made using the NETWORK menu displayed on the viewfinder or monitor screen.

CAUTION

For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions for this port.

ATTENTION

Par mesure de sécurité, ne raccordez pas le connecteur pour le câblage de périphériques pouvant avoir une tension excessive à ce port. Suivez les instructions pour ce port.

ACHTUNG

Aus Sicherheitsgründen nicht mit einem Peripheriegerät- Anschluss verbinden, der zu starke Spannung für diese

Right panel
Buchse haben könnte. Folgen Sie den Anweisungen für diese Buchse.

iDC OUT 12V (DC 12V power output) connector DC 12V power can be fed to an accessory.

jDC OUT 24V (DC 24V power output) connector DC 24 V power can be fed to an accessory.

kMeasure hook/focus reference mark

Use as reference for focusing. The same reference mark is also provided at the right of the riser plate (page 13).

For actual measurement of the distance from a subject, you can fix the end of a tape measure to the hook.

eSafety release tab

fAccessory clamp lever

gLock release knob

hAccessory mount lever

aAssignable buttons 1, 2, 3

 

 

1

2

3

bLOCK switch

 

Display/menu operation block

 

 

cRUN button and indicator

 

(page 13)

d4/AUTO BLK BAL switch

iMemory stick section

jFocus reference mark

kTripod receptacles (bottom)

Riser plate

aAssignable buttons 1, 2, 3

You can assign various functions to these buttons, using the subdisplay on the left panel or on the assistant panel or the menu displayed on the viewfinder or monitor screen. The ND filter selection function is assigned to button 1 and the CC filter selection function to button 2 at the factory. (No function is assigned to button 3.)

For details, see “3-2-10 Allocation of Functions to the Assignable Buttons and Switch” (page 35) and “3-7 Detailed Settings of the Switch Functions” (page 48).

bLOCK switchTo disable operations on the panel.

You can make a setting to allow the RUN button to be activated even when the LOCK switch is set to ON on the <SUBDISPLAY 2> page on the USER (OPERATION) menu.

cRUN button and indicator

To start/stop recording on the SRW-1 HD Portable Digital Recorder docked on the camera. The indicator is lit while the recorder is in Recording mode.

The indicator flashes as a warning in some cases.For details on warning indication, see “Warning/Error Messages” (page 108).

12

Locations and Functions of Parts