Manuals / Brands / Photography / Camcorder / Sony / Photography / Camcorder

Sony F35 3-13Inverting the, Camera Picture, the Video Format, 3-14Detailed Setting of, “2-8, Built-in, Setting the, <OTHERS 1> page, Clock” (page 25), Available formats

1 124

Download 124 pages, 3.37 Mb

3-13 Inverting the	3-14 Detailed Setting of
Camera Picture	the Video Format

Settings and Adjustments Basic 3 Chapter

The image-inversion function allows you to cancel the image inversion phenomena that occurs when a cine-lens converter is used.

Use the <OTHERS 1> page on the USER (MAINTENANCE) menu to access to this function.

<OTHERS 1> page

<OTHERS		1>	U20
FAN	MODE		: AUTO1
CAM	BARS		: OFF
HD-BAR(VF/MONI)
	BAR	16:9(100%)
SD-BAR
	SMPTE
IMAGE INVERT			:BOFF

Set IMAGE INVERT to ON to activate the image- inversion function. The upside of the picture comes down, swapping the right and left.

You can select various video formats according to that of the video recorder used in combination.

Available formats

Frame rate	Signal		Frame rate	Signal
	format			format
23.98PsF	4:2:2 YCbCr		S29.97PsF	4:2:2 YCbCr

	4:4:4 RGB			4:4:4 RGB

S23.98PsF	4:2:2 YCbCr		50P	4:2:2 YCbCr

	4:4:4 RGB		S50P	4:2:2 YCbCr

24PsF	4:2:2 YCbCr			4:4:4 RGB 1)
	4:4:4 RGB		S59.94P	4:2:2 YCbCr

S24PsF	4:2:2 YCbCr			4:4:4 RGB 1)
	4:4:4 RGB		59.94I	4:2:2 YCbCr

25PsF	4:2:2 YCbCr			4:4:4 RGB

	4:4:4 RGB		50I	4:2:2 YCbCr

S25PsF	4:2:2 YCbCr			4:4:4 RGB

	4:4:4 RGB		S60P	4:2:2 YCbCr

S30PsF	4:2:2 YCbCr			4:4:4 RGB 1)
	4:4:4 RGB

29.97PsF	4:2:2 YCbCr

	4:4:4 RGB

1)Selectable only when the HKSR-102 Picture Cache Board and the HKSR- 103 RGB 60P Processor Board are mounted in the SRW-1. Outputs from the HD-SDI A/B connectors of the interface box are turned off.

You can confirm the format being selected on the FUNCTION display (page 44).

Any eight of above formats of highest need can be registered to be selected on the subdisplay.

For format selection on the subdisplay, see “3-2-3 Selection of Video Formats” (page 32).

Using the <OUTPUT FORMAT> page of the MAINTENANCE menu enables selection of the mainly used format in interface with the SRW-1 HD Portable Digital Recorder.

Frame frequency of 23.98PsF and signal format of 4:4:4 RGB have been selected at the factory.

Changing the format

Referring to the procedure mentioned in “2-8 Setting the Built-in Clock” (page 25), select MAINTENANCE menu

54	Inverting the Camera Picture / Detailed Setting of the Video Format

Contents

Page WARNING AVERTISSEMENT WARNUNG Table of Contents Chapter 1 Overview Chapter 2 Installation and Preparations Chapter 3 Basic Adjustments and Settings Chapter 4 Menu Configuration and Detailed Settings Chapter 5 Storage and Retrieval of User Setting Data Appendixes Overview 1-1Features Dockable system of the SRW-1HD Portable Digital Recorder Compatible with film-cameraaccessories Assignable switches Saving/retrieving settings with a “Memory Stick”1) Operational Versatility 1-2Example of System Configuration 1-3Locations and Functions of Parts 1-3-1Camera Head Left panel aLevel vial bL handle The L handle is attached to the top of the camera head at the factory cAccessory pockets Right panel Buchse haben könnte. Folgen Sie den Anweisungen für diese Buchse DC OUT 12V (DC 12V power output) connector DC OUT 24V (DC 24V power output) connector kMeasure hook/focus reference mark dAssignable 4/AUTO BLK BAL (auto black balance) switch (page 14) For details, see “Chapter 2 Installation and Preparations” iMemory Stick section A slot to accommodate a “Memory Stick” is provided behind the rubber cap fMENU SEL (selection) /ENTER dial Rear panel The mounting/unmounting mechanism is the same as that on the top (page 13) eRecorder/interface box receptacles When using a rechargeable battery 1-3-2Assistant Panel (Supplied) 1-3-3Interface Box (Supplied) eCamera connector fCamera connector Installation and Preparations 2-1Mounting the Interface Box To detach 2-2Mounting the SRW-1Recorder 2-3Attaching a Lens 2-4Attaching a Viewfinder 2-5Mounting the Camera to a Tripod 2-6Attaching/Detaching Handles 2-6-1L Handle 2-6-2Center Handle (Supplied) 2-7Preparing the Power Supply 2-8Setting the Built-inClock Page Basic Adjustments and Settings 3-1Selection of the Basic Operation Modes 3-1-1Overview of the Basic Operation Modes 3-1-2Switching of the Basic Operation Modes <BASE SETTING> page of the MAINTENANCE menu SHOOT MODE Switch between CINE and CUSTOM on this line D-RANGE COLOR SPACE 3-2Basic Settings with the Subdisplay 3-2-1Basic Operation of the Subdisplay 3-2-2Shutter Settings To select the frame rate (number of frames per second) 1 Move the cursor to To use Compensation mode AC: Angle Compensation mode GC: Gain Compensation mode 3-2-3Selection of Video Formats 3-2-4Retrieving the ND Offset ND:1 3-2-5Selection of the Gain, Color Temperature, and White Balance Memory 0dB(450) 800% TUNGSTEN 3-2-6Selection of a Lens File LENS:1 No Offset 3-2-7Confirmation of the Time Code and Tape Remaining TCR 00:00:00:00 20min 3-2-8Confirmation of the Power Voltage and Selection of Fan Operation Mode 11.4V 24.1V FAN:AUTO1 3-2-9ON/OFF of the Character Indication 3-2-11Brightness Adjustment of the Subdisplay BRIGHT:1 3-2-12Selection of Gamma Tables 3-2-13Selection of Color Spaces COLOR SPACE 3-3Black Balance Adjustment 3-4White Balance Adjustment (in Custom mode) 3-5Setting the Camera Outputs 3-5-1Selecting a Video Output Signal for Each Connector 3-5-2Setting the Monitor Picture To compare the playback picture and camera image PB MIX <PB MIX SETTING> page MIX TYPE How the picture is to be displayed can be selected 3-5-3Outputting Color Bars 3-6Viewing and Setting the Viewfinder Displays 3-6-1Viewing the Basic Status Indications 3-6-2Viewing the ABNORMAL <!> Display 3-6-4Setting the Marker Indications Adjusting the Viewfinder Details 3-6-6Setting the Zebra Indication 3-6-7Setting the Cursor Indication 3-6-8Checking the Power Voltage 3-7Detailed Settings of the Switch Functions 3-8Setting the Gain 3-9Detailed Shutter Settings • DELETE For deleting the step shutter value displayed in the [deg] column in Step mode FRAME RATE The selecting range depends on the formats, as follows: COMP MODE 3-10Resuming the 3-11Selecting the Standard Conditions Gamma 3-11-1Using the Standard Gamma 3-11-2Using the Hyper Gamma 3-11-3Using the S-LOG 3-11-4Using the User Gamma 3-12Setting the Fan Operation Mode 3-13Inverting the Camera Picture the Video Format <OUTPUT FORMAT> page of MAINTENANCE menu CURRENT SCAN FRAME SIGNAL Menu Configuration and Detailed Settings 4-1Menu Configuration 4-2Basic Menu Operations 4-2-1Displaying Setting Pages 4-2-2Setting the Menu Items 4-3Menu List 4-3-1OPERATION Menu Page Page Page Page Page Page 4-3-2PAINT Menu Page Page Page Page Page 4-3-3MAINTENANCE Menu Page Page Page Page 4-3-4NETWORK Menu 4-3-5FILE Menu Page Page Page 4-3-6DIAGNOSIS Menu 4-4Editing the USER Menu 7 Add the remaining items by repeating steps 4 to You can add up to 10 items on one page To delete items from a page Proceed as follows: 2 Select “DELETE,” and push on the MENU SEL/ ENTER dial 4 Select INSERT then push on the MENU SEL/ENTER dial The selection screen appears 5 Turn the MENU SEL/ENTER dial to move the pointer to the desired page, then push on the MENU SEL ENTER dial Storage and Retrieval of User Setting Data 5-1File Configuration Reference file You can back up the reference file in a “Memory Stick.” User-Gammafile For file operation, use the <USER GAMMA> page of the FILE menu OHB file 5-2List of Items Stored in Files 5-3File Operations 5-3-1Using a “Memory Stick” 5-3-2Storage and Retrieval of the Operator File 5-3-3Registration and Retrieval of the Lens Files 5-3-4Storage and Retrieval of the Scene Files 5-3-5Storage and Retrieval of the Reference File 5-3-6Reading of the User Gamma 5-3-7Storage of the OHB File 5-3-8Resetting to the Initial Settings Appendixes Using the RM-B750 Connection Operating the Menu of This Camera Monitoring the Camera Image Using the MSU-900/950 Connections Parameter Settings Settings on the MSU-900/950 Set the unit to Engineer mode and set the communication For details on operations, refer to the Operation Manual of parameters, using the Ethernet Configuration menu the MSU-900/950 Using the ARRI Remote Control About Metadata Page Page Page 1. System Formats 2. Master Gain 3. VTR Warning 4. Audio Delay The values shown in the Code column are recorded as Metadata Page Warning/Error Messages Precautions About a “Memory Stick” •Attach the label so that it does not stick out beyond the labeling position •Carry and store the “Memory Stick” in its case •Do not strike, bend, or drop the “Memory Stick” •Do not disassemble or modify the “Memory Stick” •Do not allow the “Memory Stick” to get wet Specifications Camera Head Dimensions With the L handle attached Interface Box (Supplied) Optional Accessories Connector Pin Assignments DC IN (8-pinmale) EXT I/O (5-pinfemale) ETHERNET (Modular jack) Conforming to IEEE 802.3u (100BASE-TX),IEEE802.3 (10BASE-T) DC OUT 12 V (11-pinfemale) DC OUT 24 V (3-pinfemale) Colorimetry 1. Virtual chromaticity points at S-GAMUT Lip Sync Compensation For timecode-synchronizedaudio recording on a separate digital audio recorder Index Symbols Numerics