3-8 Setting the Gain

If the gain of the video amplifier of this camera is to be switched using the gain switch of the RM-B150 Remote Control Unit, the gain values for the corresponding switch positions must be specified in advance.

Use the <GAIN ASSIGN> page of the USER (OPERATION) menu.<GAIN ASSIGN> page

<GAIN ASSIGN>

U14

GAIN [L]:B 0 dB [M]: 6 dB [H]: 12 dB

Menu item

Setting

 

 

GAIN [L] Gain value corresponding to the L position of the gain switch

GAIN [M] Gain value corresponding to the M position of the gain switch

GAIN [H] Gain value corresponding to the H position of the gain switch

Any of –6, –3, 0, 3, 6, 9, or 12 dB can be set for each of the L, M, and H positions, in any sequence.

3-9 Detailed Shutter Settings

The Electronic Shutter function of this camera enables shooting with various shutter angles and shutter speeds (sec).

While the basic settings of the shutter can be made on the subdisplay, the <SHUTTER/FPS> page of the USER (PAINT) menu permits you to set the shutter while observing the shutter angle, the shutter speed (sec), and the frame rates at a glance.

<SHUTTER/FPS> page

<SHUTTER/FPS> U19

SHUTTER :B ON

[deg] [sec] 180.0 (1/47.96)

STEP CONTINUOUS

STEP ASSIGN ADD DELETE

FRAME RATE: (24)FPS

COMP MODE : OFF

SHUTTERTo activate the electronic shutter, set this to ON.

The currently selected shutter angle is displayed in the [deg] column. In the [sec] column, the speed (sec) converted according to the selected frame rate is displayed.

STEP (Step mode)To select a value registered as a step shutter, move the cursor on this line.

Turn the MENU SEL/ENTER dial to display a registered shutter value in the [deg] and [sec] columns one after another in order.

CONTINUOUS (Continuous mode)

To fine-adjust the selected step shutter value or use a value that has not been registered as a step shutter, move the cursor on this line.

The values in the [deg] and [sec] columns will change continuously when the MENU SEL/ENTER dial is turned.

STEP ASSIGN

Addition and deletion of step shutter values can be performed in the same way as with the SHUTTER ASSIGN page (see page 31) of the USER (OPERATION) menu.

• ADD

For registering a shutter value displayed in the [deg] column in Continuous mode as a new step shutter value. If eight step shutter values have been already registered,

Settings and Adjustments Basic 3 Chapter

Setting the Gain / Detailed Shutter Settings

49