Sony F35 3-5-2Setting the Monitor Picture, RM VIDEO, MONI GAMMA ENABLE, <PB/MONI GAMMA> page, Example 1: SHUTTER OFF, Timing of the pulse signal

Settings and Adjustments Basic 3 Chapter

Setting	Signal
VBS	The VBS signals are output. (Default)
VF2	The HD-Y signals are output.
REF-THRU	The reference signal that is input to the
	GENLOCK IN connector is output as-is.
FRAME	A pulse is output per frame (in a case of
	1 FPS, one pulse per second).

Timing of the pulse signalExample 1: SHUTTER OFF

1 frame

CCD exposure Exposure Exposure

Frame pulse

Example 2: SHUTTER ON, shutter angle 180º

1 frame

CCD exposure Exposure Exposure

Frame pulse

RM VIDEO

The video signals to be output to equipment connected via the REMOTE connector can be selected.

Setting	Signal
VBS	The VBS signals are output. (Default)
VF2	The HD-Y signals are output.

3-5-2 Setting the Monitor Picture

Using the <PB/MONI GAMMA> page of the USER (OPERATION) menu displayed on the viewfinder screen, the gamma setting of the monitor picture and the playback- picture monitor mode can be selected.

<PB/MONI GAMMA> page

<PB/MONI GAMMA> 08

MONI GAMMA ENABLE:				OFF
		VF	MONI	VBS
PB	:B	OFF	OFF	OFF
PB	MIX:	OFF	OFF	OFF

MONITOR GAMMA

VF : OFF

MONI : OFF

VBS : R709

GAMMA MARK SETTING

To apply monitor gamma to the monitor pictureMONI GAMMA ENABLE

If this is set to ON, the monitor gamma (ITU-R709) appropriate for monitoring1) is applied to the video signals output from the VF1, VF2, MONITOR OUT HD SDI 1/2, or REMOTE connector. The video output signals from those connectors are selected on the <MONITOR OUTPUT> page.

This setting is effective when S-LOG gamma is applied to the video output signals for recording intended for post- production editing.

1)The VBS output signal always becomes the camera image to which ITU- R709 gamma is applied.

Notes

•If the monitor gamma is activated with 23.98PsF/ S23.98PsF, the output for viewfinders and monitors is switched to 59.94i. In the case of 24PsF/S24PsF, the output is switched to 50i. To eliminate this phenomena, change the DOWN CONVERTER setting on the <POWER SAVE> page of the MAINTENANCE menu from ACTIVE to PWR SAVE.

•Some of the paint settings (such as black gamma, knee, detail, matrix, etc.) for the main line are not applied to monitor gamma.

To monitor the playback picture

The playback picture of the recorder can be confirmed with a monitor connected to the camera or on the viewfinder screen.2)

2)When MONI GAMMA ENABLE is set to OFF, the same gamma as that applied to the main line is applied to all the outputs. However, the PB and PB MIX modes can be independently selected for the VF, MONI, and VBS signals.

PB

The playback-signal output mode can be selected for each VF, MONI, or VBS signal.

Setting	Signal
ON	The playback picture of the recorder is always
	output.
AUTO	Normally, the camera image is output. When
	the recorder enters playback mode (PLAY, FF,
	REW, or REC REVIEW,) the playback picture
	is automatically selected.
OFF	The camera image is always output. (Default)

Note

If the recorder is turned off with PB ON, the picture on the viewfinder/monitor screen is distorted. The normal picture is restored by turning the recorder on or setting PB to AUTO or OFF.

40 Setting the Camera Outputs