Sony F35 3-2-8Confirmation of the Power, Voltage and Selection of Fan, Operation Mode, 3-2-9ON/OFF of the Character Indication, 11.4V 24.1V FAN:AUTO1, VF1:ON VF2:ON

3-2-8 Confirmation of the Power

Voltage and Selection of Fan

Operation Mode

The values in voltage of the power sources connected to the camera can be confirmed on the subdisplay.

On the same page, the operation mode of the built-in fans can also be selected.

Voltage confirmation/Fan Operation mode select page

12

11.4V 24.1V FAN:AUTO1

At 1 and 2 on the first line, the values in voltage of the 12-V and 24-V power systems are displayed, respectively. If power is not supplied, “- -” is displayed.

If the voltage falls to the NEAR END level, the indication starts flashing. If the voltage falls further down to the END level, the indication flashes rapidly.

The NEAR END and END levels can be set on the <BATT ALARM SET> page of the MAINTENANCE menu.

On the second line, Fan Operation mode can be changed.

Setting	Operation of the fans
AUTO1 (default)	The fans are automatically controlled
	according to the internal temperature.
	Normally use this mode.
AUTO2	In synchronization with recording, the
	fans are controlled for the quietest
	condition.
	As the rotation speed will increase if the
	internal temperature rises, use other
	modes for recording that may continue
	several tens of minutes.
MIN	The quietest fan operation is
	maintained.
	Use this mode for long recording at
	ordinary temperatures.
MAX	The fans rotate at the maximum speed
	to lower the internal temperature.

3-2-9 ON/OFF of the Character Indication

Superimposition of character data onto camera images can be activated or deactivated by output destination.

Character indication setting page

VF1:ON VF2:ON

MON:ON VBS:ON

VF1

Viewfinder connected via the VF1 connector (default: ON)

VF2

Viewfinder connected via the VF2 connector (default: ON)

MON

Monitors connected via the MONITOR OUT HD SDI connectors (default: ON)

VBS

Monitors connected via the TEST OUT and REMOTE connectors (default: ON)

3-2-10 Allocation of Functions to the Assignable Buttons and Switch

Various functions can be allocated to assignable buttons 1 to 3 and assignable switch 4 (the upper position of the 4/ AUTO BLK BAL switch) that are located on the side of the camera and on the assistant panel.

At shipment, no function is allocated to these buttons.

Functions that can be allocated to assignable buttons 1 to 3

Menu	Function
indication
ND	Selection of the ND filter
REC REVIEW	With REC REVIEW set to NORM on the
	SRW-1, the last part of the recorded tape
	is normally rewound for 3 seconds
	(maximum: 10 seconds) then played
	back.
	With REC REVIEW set to ALL on the
	SRW-1, the tape is rewound to the
	recording start position then played back.
PB(VF)	The video signals being played back on
	the SRW-1 are output to the viewfinder.
VF709GAM	ON/OFF of the fixed ITU-R709 gamma of
	the viewfinder
MONI709GAM	ON/OFF of the fixed ITU-R709 gamma of
	the monitor
FAN MODE	Switching of Fan Operation mode

Settings and Adjustments Basic 3 Chapter

Basic Settings with the Subdisplay 35