Sony F35 manual 75

MAINTENANCE menu

Page title &	No.	Item	Default	Settings	Remarks
purpose
<OUTPUT	M07	CURRENT	23.98PsF 4:4:4		The current format is
FORMAT>	[M03]				displayed.
Setting the output		SCAN	PROGRESSIVE	PROGRESSIVE,	When INTERLACE is
video format				INTERLACE	selected for SCAN, select
		FRAME	23.98	23.98, 24, 25, 29.97, 30,	half the value of the field
				50, 59.94, 60	frequency in FRAME.
		SIGNAL	4:4:4 RGB	4:4:4 RGB, 4:2:2 YCbCr
		SELECT FPS	OFF	ON, OFF
		SET FORMAT		Execute by ENTER.
<DOWN	M08	ASPECT	LB	SQ, LB, EC	SQ: Squeeze
CONVERTER>	[M04]				LB: Letter Box
Setting the aspect					EC: Edge Crop
ratio for VBS output
<POWER SAVE>	M09	MONITOR OUT	ACTIVE	PWR SAVE, ACTIVE
Selecting the output	[M05]	DOWN CONVERTER	ACTIVE	PWR SAVE, ACTIVE
power save mode
<BATT ALARM	M10	DC IN (24 V)
SET>	[M06]
		TYPE	AC ADP	BATT1, BATT2, AC ADP	BATT1/BATT2: Batteries
Setting the voltage					AC ADP: AC adaptor
values to trigger		NEAR END	22.2 V	0.1 to 30.0 V	Fixed to the default value
alarm indications
					for AC ADP
		END	21.6 V	0 to 29.9 V	Fixed to the default value
					for AC ADP
		DC IN (12 V)
		TYPE	AC ADP	BATT1, BATT2, AC ADP	BATT1/BATT2: Batteries
					AC ADP: AC adaptor
		NEAR END	11.1 V	11.0 to 17.0 V	Fixed to the default value
					for AC ADP
		END	10.8 V	10.5 to 14.0 V	Fixed to the default value
					for AC ADP
<GENLOCK>	M11	REFERENCE		INTERNAL, GENLOCK	display only
Adjusting Genlock	[M07]			IN
with status		STATUS		OK, NG, NO SIGNAL	display only
indications		H PHASE	0	–511 to 511	To adjust the H phase for
					genlock
<DATE>	M12	DATE/TIME		yyyy/mm/dd
Setting the built-in	[M08]			hh : mm
clock

Settings Detailed and Configuration Menu 4 Chapter

Menu List 75