For details on these operations, refer to the Master Setup Unit or Remote Control Panel manuals.

cWF OUT (waveform monitor output) connector (BNC-type)

Outputs the video signal for a waveform monitor selected with the WF MONITOR button of an RCP-700/900 series Remote Control Panel or MSU-900 series Master Setup Unit.

For details on these operations, refer to the Master Setup Unit or Remote Control Panel manuals.

HKCU1005 SDI Output Expansion Unit (optional)

Note

To reduce the risk of electric shock, fire or injury, do not open the cabinet. To adjust the internal settings, refer to qualified service personnel.

The HKCU1005 consists of a DRX front board and a HIF rear boards.

When these boards are installed in the front and rear expansion slots of the unit, four SDI output connectors are added to the unit.

For details on installation, contact a Sony service or sales representative.

DRX Board
PsF: Not functionFC: Lights when the frame rate converter function of the unit is performed.

60/50/30/25/24: One of these indicators corresponding to the field/frame frequency of the output signals lights.

Note

The 30, 25, and 24 indicators do not function on the HDCU3300.HIF Board

SDI OUT 1

2

1SDI OUT1, 2, 3, 4 connectors

3

4

aSDI OUT1, 2, 3, 4 (HD/SD serial digital interfaceoutput 1 to 4) connectors (BNC-type)The signal from the video camera is supplied as four HD- SDI or SD-SDI signals.

DRX

1080

720P

SD

PsF

FC

1Output signal format indicators

60

50

30

25

24

aOutput signal format indicators Displays the format status of the output signal. 1080/720P/SD: One of these indicators corresponding to

the signal status of the SDI OUTPUT 1, 2 connectors of the four SDI signal output from this unit lights.

42 Locations and Functions of Parts