Sony HDCU3300 CCU, CAM, Good, Red:, PsF:, DTX Board, DPR-ABoard, 1080/720P:, Green: Good, d+/– switch, 60/50/30/25/24:, PsF: Not function, “Memory stick” slot

b“Memory stick” slot

Insert an upgrade “Memory Stick” to upgrade the software version of this unit.

To insert a “Memory Stick”

Insert the “Memory Stick” into the slot so that the labeled side of the stick faces you.

When the “Memory Stick” is correctly set, the ACCESS indicator lights in green. If the indicator stays dark, the “Memory Stick” may be inserted incorrectly. Check the stick and reinsert it. To eject the “Memory Stick,” press it in.

Note

Do not eject a “Memory Stick” when the ACCESS indicator is lit in red (which means that data is being read from or written to the “Memory Stick”). This may erase data stored in the “Memory Stick.”

DTX Board

DTX

CCU

1Optical condition indicators

CAM

CHARACTER

DISP

OFF 2 Menu control switch

MENU

CANCEL 3 CANCEL/ENTER switch

ENTER

4 +/– switch

aOptical condition indicators

The corresponding LEDs light to show the condition of optical signal reception at this unit (CCU) and the camera (CAM):

Green: GoodYellow: Low optical level

Red: Extremely low optical level, or disconnection If communication with the connected camera is not established, all three CAM indicators (green, yellow and red) go dark.

bMenu control switch

Displays the setting status of this unit or the setup menu on the monitor connected to this unit.

DISP: Displays the setting status of this unit.OFF: Does not display the setting status or the setup menu.MENU: Displays the setup menu.

cCANCEL/ENTER switch

Used for operations on the setup menu. Press towards ENTER to select an item or to enter a setting, or towards CANCEL to cancel the setting.

d+/– switchUsed to adjust the setting items on the setup menu.DPR-A Board

DPR A

1080

720P

PsF

MODE

1Output signal format indicators

60

50

30

25

24

aOutput signal format indicators Displays the format status of the output signal. 1080/720P: One of these indicators corresponding to the

signal status of the two HD-SDI (SS-A/B/C) signal output from this unit lights.

PsF: Not function

MODE: Reserved for future use

60/50/30/25/24: One of these indicators corresponding to the field/frame frequency of the output signals lights.

Note

The 30, 25, and 24 indicators do not function on the HDCU3300.

Internal Switches and Internal Boards 45