![](/images/backgrounds/209183/209183-5241x1.png)
aVBS 1, 2 (composite video output 1, 2) connectors
The signal from the video camera may be output as two analog composite signals.
bPIX OUT (picture monitor output) connector
NTSC
PAL
REF IN
UN
LOCK
SC PHASE
1 SD signal format indicators
2
Outputs the video signal for a picture monitor selected with the PICTURE MONITOR button of an
Character signals or marker signals can be superimposed on the video signal output through this connector.
For details on these operations, refer to the Master Setup Unit or Remote Control Panel manuals.
ADV
3 SC PHASE switch
DELAY
aSD signal format indicators
Either of these indicators lights, corresponding to the SD signal format.
bSUB REFEither of these indicators lights, corresponding to the reference signal input via the FRAME REF IN connector on the
UNLOCK: Lights when the reference signal is not synchronized with the reference signal input via the REFERENCE connector of the unit.
cSC PHASE (subcarrier phase) switchUsed to adjust the SC phase with respect to the reference signal (black burst).
Press and hold the switch towards ADV to advance the phase or towards DELAY for delay. The phase is advanced or delayed only while the switch is held pressed.
cWF OUT (waveform monitor output) connector
Outputs the video signal for a waveform monitor selected with the WF MONITOR button of an
For details on these operations, refer to the Master Setup Unit or Remote Control Panel manuals.
FRAME
REF IN
1FRAME REF IN, OUT connectors
OUT
PIX
OUT
2 PIX OUT connector
WF
OUT
3 WF OUT connector
VBS 1
1VBS 1, 2 connectors
2
PIX
OUT
2 PIX OUT connector
WF
OUT
3 WF OUT connector
bPIX OUT (picture monitor output) connector
Outputs the video signal for a picture monitor selected with the PICTURE MONITOR button of an
Locations and Functions of Parts | 41 |
|
|