Sony FDR-AX100E, HDR-CX900E manual The remaining battery power is not displayed correctly

Use the AC Adaptor.

In the default setting, this product turns itself off when no operations are performed for more than about 2 minutes ([Power Save]). Change the setting of [Power Save], or turn on the power again.

Charge the battery pack.

[209] Troubleshooting

Troubleshooting

Batteries/power sources

The POWER/CHG (charge) lamp does not light while the battery pack is being charged.

Turn off this product.

Attach the charged battery pack to this product correctly.

Connect the power cord (mains lead) to a wall outlet (wall socket) properly. The battery charge is completed.

[210] Troubleshooting

Troubleshooting

Batteries/power sources

The POWER/CHG (charge) lamp flashes while the battery pack is being charged.

When the battery is being charged using the Built-in USB Cable, disconnect the Built-in USB Cable and connect it again.

If the temperature of the battery pack is too high or too low, you may not be able to charge it. Attach the charged battery pack to this product correctly. If the problem persists, disconnect the AC Adaptor from a wall outlet (wall socket) and contact your Sony dealer. The battery pack may be damaged.

[211] Troubleshooting

Troubleshooting

Batteries/power sources

The remaining battery power is not displayed correctly.