Sony FDR-AX100, HDR-CX900 Cor E Self-diagnosis display C04, C13 / C32, Battery level warning

display/Warning indicators

Self-diagnosis display

If indicators appear on the LCD monitor or in the viewfinder, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. When you contact them, give them the complete error code beginning with C or E displayed on the LCD monitor.

You may hear a melody when an important warning indicator appears on the LCD monitor.

C:(or E:) : (Self-diagnosis display)

C:04:

You are not using the designated battery pack. Make sure to use the designated battery pack. Connect the DC plug of the AC Adaptor to the DC IN jack of this product firmly.

C:06:

The battery pack temperature is high. Change the battery pack or place it in a cool place.

C:13: / C:32:

Remove the power source. Reconnect it and operate this product again.

E: :

Follow the steps from 2 on “If you have problems.”

(Battery level warning)

The battery pack is nearly used up.

Depending on the operating environment or battery conditions, may flash even with about 20 minutes of power remaining.

(Warning indicator pertaining to battery pack temperature)

The battery pack temperature is high. Change the battery pack or place it in a cool place.

(Warning indicator pertaining to memory card)

Slow flashing

Free spaces for recording images are running out. No memory card is inserted.

Fast flashing

There is not enough free spaces for recording images. After storing the images on other media,