Sony HDR-HC9 manual No picture appears during END Search or Rec Review

Trssb_sshsstisS/Ssstisssd)

•There is a blank section between recorded sections of the tape. This is not a malfimction.

No picture appears during [END SEARCH] or Rec Review.

•The tape was recorded in both HDV and DV lbrmats. This is not a malfimction.

J_4ch-12bappears on the LCD screen.

•This appears when you play back a tape recorded on other recording devices using a 4ch microphone (4CH MIC REC). This camcorder does not comply with the 4ch microphone recording standard.

You cannot view the picture on the TV connected with the i.LINK cable.

•You cannot view the picture in the HD (high definition) image quality on the TV which is not compatible with the

HDV 1080i specification (p. 34). Reli:r to

the instruction manuals Sul)plied with your TV.

•Down convert the pictures recorded in HDV format to DV 12)rmatand play back ill SD (standard definitionJ image quality

(p. 59).

•Play back pictures using another connecting cable (p. 341.

You cannot view the picture or hear the sound on the TV connected with

the component video cable.

•Set [COMPONENT] on tile

/STANDARD SET) menu according to the requirements of the connected device

(p. 59).

•When you am using the component video cable, make sure the red and white plugs of the A/V connecting cable arc connected (p. 34).

You cannot view the picture or hear the sound on the TV connected with the HDMI cable.

•Pictures in the DV format are not output fiom the HDMI OUT jack, if copyright protection signals are recorded in the pictures.

•DV format pictures input to the camcorder via i.LINK cable (p. 67) cannot be output.

•This occurs if you record on a tape in both HDV and DV formats. Disconnect and conneel the HDMI cable, or slide the POWER switch to turn on your camcorder again.

The picture appears distorted on a 4:3 TV.

•This happens when viewing a picture recorded ill the 16:9 (wide) mode on a 4:3 TV. gel [TV TYPE] on the (STANDARD SET) metal (p. 59) and play back the picture.

Black bands appear at the top and bottom on a 4:3 TV.

•This happens when viewing a picture recorded in 16:9 (wide) mode on a 4:3 TV. This is not a malflmction.

Pictures from connected devices cannot be zoomed.

• You cannot zoom pictures from connected

devices on your camcorder (p. 301.

Time code and other information

appear on the display of the connected device.

•Set [DISP OUTPUTI to [LCD PANELI while connected with an A/V connecting cable (p. 611.

84