Installing the speakers on the wall

You can install your speakers on the wall.

1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below.

4 mm (3/16 inch)

more than 25 mm (more than 1 inch)

4.6 mm (3/16 inch)

10 mm (13/32 inch)

Hook on the back of the speaker

2 Fasten the screws to the wall. The screws should protrude 7/32 to 9/32 inch.For the center speaker

160 mm

(6 5/16 inches)

5 mm to 7 mm (7/32 to 9/32 inch)

For the front speakers and surround speakers
3 Hang the speakers on the screws.

4.6 mm (3/16 inch)

10 mm (13/32 inch)

Rear of speaker

Notes

•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied.

•Contact a screw shop or installer regarding the wall material or screws to be used.

•Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

5 mm to 7 mm (7/32 to 9/32 inch)

14US