Settings for the Speaker

(SP SETUP menu)

You can use the SP SETUP menu to set the distance of the speakers connected to this receiver.

Select “SP SETUP” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 30) and “Overview of the menus” (page 31).

SP SETUP menu parameters
xCNT SP (Center speaker)

Lets you select the center speaker.

xSUR SP (Surround speaker)

Lets you select the surround speakers.

xFL DIST (Front left speaker distance)
xFR DIST (Front right speaker distance)

Lets you set the distance from your listening position to the front speaker (A). If both front speakers are not placed an equal distance from your listening position, set the distance to the closest speaker.

A 30˚ 30˚ A

100˚-120˚ 100˚-120˚

xSR DIST (Surround right speaker distance)
xSL DIST (Surround left speaker distance)

Lets you set the distance from your listening position to the surround speakers.

xSW DIST (Subwoofer distance)

Lets you set the distance from your listening position to the subwoofer.

Notes

•“CNT DIST” does not appear when you set “CNT N” in the “SP SETUP” setting.

•“SR DIST” and “SL DIST” do not appear when you set “SUR N” in the “SP SETUP” setting.

Tip

When the Auto Calibration result is saved, you can adjust the speakers distance in 1 cm steps. If the Auto Calibration result is not saved, you can adjust the speakers distance in 10 cm steps.

xCNT DIST (Center speaker distance)

Lets you set the distance from your listening position to the center speaker.

34US