TV, etc.
|
|
| Audio signals | Audio/video | ||
|
|
|
|
|
| signals |
|
| C |
|
| B | A |
L |
| L | DIGITAL | TV | ANTENNA | |
|
|
| ||||
R |
| R |
|
|
| AM |
AUDIO IN | AUDIO IN | AUDIO IN | COAX IN | OPT IN | OPT IN |
|
VIDEO 1 | TV | VIDEO 2 | SAT |
|
| |
mA MAX
HDMI
BD IN | DVD IN | SAT IN | OUT |
RT
A
A
A
Audio/video |
| Audio/video |
| Audio/video |
signals |
| signals |
| signals |
|
|
|
|
|
| DVD recorder/ |
| Satellite tuner/ | |
player |
| DVD playera) |
|
AHDMI cable (not supplied)
We recommend that you use a Sony HDMI cable.
BOptical digital cord (not supplied)b) CAudio cord (not supplied)b)
a)If you connect a DVD player, be sure to change the factory setting of the DVD button on the remote so that you can use the button to control your DVD player. For details, see “Changing the input button assignments” (page 48).
b)Connect at least one of the audio cords (B or C).
Notes on HDMI connections
•An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack. It is not output from any other audio jacks.
•Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack.
•The multi/stereo area audio signals of a Super Audio CD are not output.
•Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable.
•Sound may be interrupted when the sampling frequency, the number of channels or the audio format of the audio output signals from the playback component is switched.
•When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI OUT jack may be distorted or may not be output.
In this case, check the specification of the connected component.
•You can enjoy multi channel Linear PCM only with an HDMI connection.
•Set the image resolution of the playback component to 720p, 1080i or 1080p when you output 96 kHz multi channel sound over an HDMI connection.
•You may need to make certain settings on the image resolution of the player before you can enjoy multi channel Linear PCM. Refer to the operating instructions of the player.
•Refer to the operating instructions of each component connected for details.
•We do not recommend using an
Started Getting