There is no sound from one of the front speakers.
•Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied).
There is no sound from digital sources (from OPTICAL input jack).
•Check that the IN MODE is set to “AUTO” for SAT input.
There is severe hum or noise.
•Check that the speakers and components are connected securely.
•Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light.
•Move your audio components away from the TV.
•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
There is pop noise from a specific component connected to this receiver when you turn on the component.
•Check that the IN MODE is set to “AUTO” for SAT input (page 48).
There is no sound, or only a very low- level sound is heard from the center/ surround speakers.
•Select a
•Adjust the speaker level (page 26).
•Check that the speakers are connected securely.
There is no sound from the subwoofer.
•Check that the subwoofer is connected correctly and securely.
The surround effect cannot be obtained.
•Make sure the sound field function is on (press SOUND FIELD).
•Sound fields do not function for signals with a sampling frequency of more than 48 kHz.
Dolby Digital or DTS multi channel sound is not reproduced.
•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.
There is no sound from the component connected to the DIGITAL MEDIA PORT adapter.
•Adjust the volume of this receiver.
•The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component.
•Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver.
Video | Additional | ||
|
| ||
monitor. | |||
There is no picture or an unclear |
| ||
picture appears on the TV screen or | Information | ||
• Make sure you have connected the video | |||
| |||
output of your video component to the TV. |
| ||
• Move your audio components away from |
| ||
the TV. |
| ||
• Depending on the DIGITAL MEDIA |
| ||
PORT adapter, video output may not be |
| ||
possible. |
| ||
|
|
| |
continued