Manuals / Brands / Home Audio / Stereo System / Sony / Home Audio / Stereo System

Sony HTSS360 Changing the brightness of the display, (DIMMER), Other Operations, 46US, Notes, Press AMP MENU, 5 Press AMP MENU

1 60

Download 60 pages, 865.43 Kb

Press AMP MENU.

“SET HDMI” appears on the display.

Notes

•The power saving function may not work for some TVs compatible with the “BRAVIA” Sync. In this case, set “P.SAVE” to “SAVE OFF.”

•Depending on your components, it may take time before image or sound is output.

•This function is available only when the Control for HDMI function is set to on.

Other Operations

Changing the brightness of the display

(DIMMER)

You can change the brightness of the display.

2 Press V/v repeatedly until “CUSTOM” appears, then press or b.3 Press V/v repeatedly until “DIMMER” appears, then press or b.4 Press V/v repeatedly to select the brightness of the display, then press .

•DIMMER Y: Low lighting.

•DIMMER N: Bright lighting.

5 Press AMP MENU.

The AMP menu turns off.

46US

Contents

Page WARNING For customers in the United States, Canada and Mexico For customers in the United States Owner’s Record Important Safety Instructions NOTE: CAUTION About This Manual The HT-SS360consists of: About area codes On Copyrights Table of Contents Description and location of parts Indicators on the display Rear panel ASPEAKERS section EDIGITAL INPUT/OUTPUT section BDMPORT CAUTO CALIBRATION section RM-AAU057 To control the component To control the DVD recorder/Blu-rayDisc recorder 11US To control the DVD player Blu-rayDisc player To control the HDD/DVD COMBO 12US To control the SAT 1: Installing the speakers Example of front speaker Installing the speakers on the wall 2 Fasten the screws to the wall. The screws should protrude 7/32 to 9/32 inch For the center speaker For the front speakers and surround speakers 3 Hang the speakers on the screws 2:Connecting the speakers Note on speaker cords To connect the speakers correctly 3: Connecting the TV 4:Connecting the audio/ video components Component to be connected Notes on connecting DIGITAL MEDIA PORT adapter HDMI features Notes on HDMI connections Connecting video components 20US 5:Connecting the antennas 6:Preparing the receiver and the remoteGetting 7:Calibrating the appropriate settings automatically Before you perform Auto Calibration Connect the supplied optimizer microphone to the AUTO CAL MIC jack 4 Press to start the measurement Confirming/saving the measurement results 1 Confirm the measurement result 2 Press V/v repeatedly to select the item. Then, press 3 Save the measurement result When error codes appear When you select “WRN CHK” When you select “DIST” or “LEVEL” When you have finished 8:Adjusting the speaker levels When a test tone is not output from the speakers Selecting a component To activate the muting function To avoid damaging your speakers Enjoying TV Turn on the TV Enjoying Blu-rayDisc or DVD 2 Turn the Blu-rayDisc or DVD player (recorder) and the receiver on 3 Press DVD or BD 5 Play back the disc 6 Adjust the volume Navigating through menus To return to the previous display To exit the menu Overview of the menus Operations Amplifier 31US 32US Settings for the HDMI SET HDMI menu parameters Settings for the Auto Calibration A.CAL menu parameters Settings for the Speaker SP SETUP menu parameters Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the Custom Menu CUSTOM menu parameters Selecting the sound field Types of sound field available To turn off the surround effect for movie/music Listening to FM/AM radio If an FM program is noisy Presetting radio stations To change the preset number What is “BRAVIA” Sync The Control for HDMI function does not work in the following cases: Preparing for the “BRAVIA” Sync When your TV is compatible with the “Control for HDMI-EasySetting” function When your TV is not compatible with the “Control for HDMI-EasySetting” function Watching a DVD/Blu-raydisc by simple operation Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) Using the Volume Limit function 2 Press v/V repeatedly until “SET HDMI” appears, then press or b Turning off the receiver with the TV Using the Power Saving function Changing the brightness of the display Changing the display setting Using the Sleep Timer Switching between digital and analog audio Audio input modes Changing the input button assignments Categories and the corresponding buttons for BD, DVD, and SAT To clear all remote button assignments Glossary xDTS Digital Surround xHDMI (High-DefinitionMultimedia Interface) xL.F.E. (Low Frequency Effects) xSampling frequency xS-master Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Video HDMI Tuner Error messages If you are unable to remedy the problem using the troubleshooting guide Remote control If the problem persist Reference sections for clearing the receiver’s memory Specifications AUDIO POWER SPECIFICATIONS Speaker section Supplied speakers Supplied accessories 57US Index