8:Adjusting the speaker levels
(TEST TONE)You can adjust the speaker levels while listening to the test tone from your listening position.
|
| AMP | |
| AMP MENU | ||
0 | ENTER | MENU | |
CLEAR | TOOLS/ |
| |
DISPLAY | MUTING | ||
OPTIONS | |||
|
| TV VOL | |
| MASTER VOL | ||
,V,v,B,b |
| MASTER | |
|
| VOL +/– | |
RETURN/EXIT | MENU/HOME |
|
1 Press AMP MENU.
“SET HDMI” appears on the display.
2 Press V/v repeatedly until “LEVEL” appears, then press or b.
3 Press V/v repeatedly until “T. TONE” appears, then press or b.
4 Press V/v repeatedly to select “T. TONE Y”, then press .
The test tone is output from each speaker in sequence as follows:
Front left t Center t Front right t Surround right t Surround left t Subwoofer
5 Press V/v repeatedly to select the desired speaker, then press
or b.
The test tone is emitted from the speaker that is being adjusted only.
•FL LVL: adjusts the front left speaker level.
•CNT LVL: adjusts the center speaker level.
•FR LVL: adjusts the front right speaker level.
•SR LVL: adjusts the surround right speaker level.
•SL LVL: adjusts the surround left speaker level.
•SW LVL: adjusts the subwoofer level.
Notes
•“CNT LVL” does not appear when you set “CNT N” in the “SP SETUP” setting.
•“SR LVL” and “SL LVL” do not appear when you set “SUR N” in the “SP SETUP” setting.
6 Press V/v to adjust the speaker level, then press or b.
You can adjust from
Note
If you do not adjust for a certain period, the test tone is emitted from the next speaker in sequence.
7 Repeat step 5 and 6 to adjust the speaker level.
8 After you have finished making adjustments, press V/v until “T. TONE” appears, then press or b.
9 Press V/v repeatedly to select “T. TONE N,” then press .
10Press AMP MENU.
The AMP menu turns off.
When a test tone is not output from the speakers
•The speaker cords may not be connected securely.
•The speaker cords may have the
•The test tone signals are not output from the HDMI OUT jack.