Sony HTSS360 What is “BRAVIA” Sync, The Control for HDMI function does not work in the following cases:, Note, 41US, 7 Press, Press DISPLAY, 8 Press MENU/HOME

6 Create a name by using

V/v/B/b.

Press V/v to select a character, then press

bto move the cursor to the next position. Letters, numbers and other symbols can be input for a radio station name.

If you enter a wrong character

Press B/b repeatedly until the character to be changed flashes, then press V/v to select the desired character.

To erase the character, press B/b repeatedly until the character to be erased flashes, then press CLEAR.

7 Press .

“COMPLETE” appears in the display and the station name is stored.

8 Press MENU/HOME.

Viewing the station name or frequency in the display

When the receiver is set to “FM” or “AM”, you can check the frequency using the display.

Press DISPLAY.

Each time you press DISPLAY, the display changes as shown.

Station namea) y Frequencyb)

a)This is displayed if you have entered a name for a preset station.

b)Returns to the original display when several seconds have elapsed.

Using “BRAVIA” Sync features

What is “BRAVIA” Sync?

“BRAVIA” Sync is compatible with a Sony TV, Blu-ray Disc/DVD Player, AV amplifier, etc., that is equipped with the Control for HDMI function.

By connecting Sony components that are compatible with the “BRAVIA” Sync with an HDMI cable (not supplied), operation is simplified as follows:

•One-Touch Play: When you play back a component such as a DVD/Blu-ray disc player, the receiver and the TV are turned on automatically and switched to the appropriate HDMI input. Be sure that the System Audio Control setting is set to on.

•System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers connected to the receiver.

•System Power Off: When you turn off the TV, the receiver and connected components are also turned off simultaneously.

Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (High- Definition Multimedia Interface).

The Control for HDMI function does not work in the following cases:

•When you connect the receiver to a component which does not correspond with Sony’s Control for HDMI function.

•When you connect the receiver and components using other than HDMI connection.

We recommend that you connect the receiver to products featuring “BRAVIA” Sync.

Note

Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component.