Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)
With 3 ohm loads, both channels driven, from 170 – 20,000 Hz; rated 84 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Models of area code U, CA Power Output1)
Stereo mode (rated) 84 W + 84 W (3 ohms at 170 – 20,000 Hz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%) FRONT2): 143 W/ch CENTER2): 143 W SUR2): 143 W/ch
(1.5 ohms at 70 Hz, THD 10%) SUBWOOFER2): 285 W
Models of area code MX Power Output1)
Stereo mode (rated) 90 W + 90 W
(3 ohms at 1 kHz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%) FRONT2): 125 W/ch CENTER2): 125 W SUR2): 125 W/ch
(1.5 ohms at 70 Hz, THD 10%) SUBWOOFER2): 210 W
1)Measured under the following conditions:
Area code | Power requirements |
U, CA | 120 V AC, 60 Hz |
|
|
MX | 127 V AC, 60 Hz |
|
|
2)Reference power output for front, center, surround speakers and subwoofer. Depending on the sound field settings and the source, there may be no sound output.
Inputs |
|
|
Analog | Sensitivity: 1 V/50 kohms | |
Digital (Coaxial) | Impedance: 75 ohms | |
Tone |
|
|
Gain levels | ±10 dB, 0.5 dB step | |
Reproduction frequency range: |
| |
| 28 – 20,000 Hz | |
FM tuner section |
|
|
Tuning range | 87.5 – 108.0 MHz | |
Antenna | FM wire antenna | |
Antenna terminals | 75 ohms, unbalanced | |
Intermediate frequency |
| |
| 10.7 MHz |
|
AM tuner section |
|
|
Tuning range |
|
|
|
| |
Area code | Tuning scale | |
|
|
|
| 10 kHz step | 9 kHz step |
|
|
|
U, CA, MX | 530 – | 531 – |
| 1,710 kHz | 1,710 kHz |
|
|
|
Antenna | Loop antenna |
|
Intermediate frequency |
| |
| 450 kHz |
|
General |
|
|
Power requirements |
|
|
|
| |
Area code | Power requirements | |
|
| |
U, CA | 120V AC, 60 Hz | |
|
| |
MX | 127 V AC, 60 Hz | |
|
|
|
Power output (DIGITAL MEDIA PORT)
DC OUT: | 5 V, 700 mA MAX |