Rear Panel
1S VIDEO jacks
2VIDEO jacks
3AUDIO jacks
4CONTROL S jack
5RESET button
6COMPONENT OUT jacks
7DC IN jack
8HDV/DV jack
9LANC jack
Overview 1 Chapter
1S VIDEO jacks
To connect a device equipped with an S VIDEO jack, use S VIDEO jacks on the unit.
If you use S VIDEO jacks, you can input/output high- quality video with less signals deterioration in quality than the one connected to the standard VIDEO jack.
When DISPLAY OUTPUT switch is set to
S VIDEO/VIDEO or ALL, text data such as the time code, menus, and alarm messages are superimposed on an external monitor connected to S VIDEO jack (page 18).
2VIDEO jacks
Use to input and output analog video signals.
Text data is superimposed on a monitor in the same way as S VIDEO jack connection (page 18).
3AUDIO jacks
Use to input and output analog audio signals.
When [AUDIO MODE] in [AUDIO SET] menu is set to [FS32K], audio source will be recorded on channels 1 and 2.
Notes
•If you input a sound whose level exceeds the acceptable range, the sound recorded will be distorted.
For details on the available volume levels, see the “Specifications” of the unit (page 74).
4CONTROL S jack
Connect to a remote control unit
You can also use the
Note
When you use a CONTROL S device, set [COMMANDER] in [OTHERS] menu to [CONTROL S].
5RESET button
If you press this button with the tip of a ballpoint pen or similar tool, the following settings are initialized.
–[CLOCK SET] (page 54) and [60i/50i SEL] (page 55) in [OTHERS] menu.
–The setting on the unit except the menu settings.
•When [AUDIO MIX] in [AUDIO SET] menu is set to [MIX], the audio output level becomes 50%
(Continued)
Chapter 1 Overview 13