Recording and Playback 2 Chapter

Playback

•If you connect the input connectors of the unit to the output connectors of a monitor, a humming noise may be generated or the image may be distorted. If these phenomena occur, use INPUT SELECT switch to select a signal that is not being input or disconnect the cables.

•To connect i.LINK cable between a monitor and the unit, use an HDV or DV-compatible monitor. To play back a tape recorded in HDV mode on a DV- compatible monitor, set [HDV t DV CONV] of [i.LINK SET] in [IN/OUT REC] menu to [DVCAM] or [DV SP] before connecting the unit with the i.LINK cable.

For details, refer to your monitor’s instruction manual.

•Some general consumer television sets are provided with a function to control equipment connected with the i.LINK cable. Such a function, however, may not work with the unit.

26

Chapter 2 Playback and Recording