Power sources

Symptom

Cause/Remedy

 

 

The power cannot be turned on.

• The power cord of the AC adaptor is disconnected.

 

t Connect the AC power cord.

 

 

The unit does not operate even if the

• Moisture condensation has occurred (page 66).

power has been turned on.

• The cassette is not inserted straight.

 

t Eject and reinsert it straight.

 

t Disconnect the power supply and then reconnect it after about 1 minute. If the

 

unit does not operate even after you reconnect the power, use a sharp-tipped

 

ballpoint pen or similar tool to press RESET button. When you press RESET

 

button, all settings including the date and time and [60i/50i SEL] will be

 

initialized.

 

 

The unit does not operate properly when

t Turn off the power and remove the power cord from the AC outlet and then

the AC adaptor is used.

reconnect the power cord.

 

 

Cassette tapes

Symptom

Cause/Remedy

The cassette cannot be inserted.

• There is moisture condensation on the head drum (page 66).

 

t With the unit powered on, wait more than one hour.

 

• The cassette is not inserted straight.

 

t Eject and reinsert it straight.

 

• Another cassette has been loaded already.

 

t Remove the cassette and insert the one you want to load.

 

 

It takes time to eject the cassette.

• This is not a malfunction.

 

t The unit ejects the cassette slowly to protect the tape. While the cassette is

 

being ejected, q (cassette) indicator blinks.

 

 

A cassette tape cannot be removed.

t Check whether the power supply is connected properly.

 

 

The cassette tape is not ejected when you

• Moisture condensation has occurred in the unit (page 66).

press EJECT button.

 

 

 

The cassette memory data and title are

• The unit does not support the cassette memory function and therefore such data

not displayed when using a cassette tape

is not displayed.

with the cassette memory function.

 

 

 

The remaining tape time is not displayed.

t To always display the remaining tape time, set [ REMAINING] in [DISPLAY

 

SET] menu to [ON].

 

 

Maintenance 5 Chapter

Chapter 5 Maintenance

57