Icon/Menu

Submenu

Setting

 

 

 

TC/UB SET

TC FORMAT

Selects the recording mode of the time code when 60i is selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO

:

Automatically sets the mode in accordance with the mode already set on a

 

 

 

 

 

 

 

cassette tape. (If nothing is recorded on the tape, the non-drop frame

 

 

 

 

 

 

 

mode is set. If the unit cannot correctly read the frame mode on the tape, it

 

 

 

 

 

 

 

will use the frame mode that was set in the last position on the tape that

 

 

 

 

 

 

 

the unit can read correctly. If you remove the cassette, the mode of the

 

 

 

 

 

 

 

last position that the unit was able to read correctly is cleared and the non-

 

 

 

 

 

 

 

drop frame mode is set when recording is restarted from the same

 

 

 

 

 

 

 

position.)

 

 

 

 

 

DF :

Selects the drop frame mode.

 

 

 

 

 

NDF :

Selects the non-drop frame mode.

Note

When [60i/50i SEL] is set to [50i], the unit operates as a 50i specification model. Therefore, the internal time code is set to the non-drop frame mode. Even if 60i signals are input to HDV/DV jack when [60i/50i SEL] is set to [50i], the time code generated by the unit is in the non-drop frame mode regardless of [TC FORMAT] setting. To set the time code in the drop frame mode, set [60i/50i SEL] to [60i]. As a result, [TC FORMAT] setting will return to the status before [60i/50i SEL] was set to [50i].

TC RESET Reset the time code value to 00:00:00:00.

 

NO

:

Does not reset the time code value.

 

YES

:

Resets the time code value.

Note

This setting is available only when the unit in REC or REC PAUSE mode. Also, when INPUT SELECT switch is set to HDV/DV and [HDV/DV IN TC] is set to [EXTERNAL], this setting will not be affected and the time code will not be reset.

OTHERS menu

Icon/Menu

Submenu

Setting

 

 

 

 

OTHERS

LANGUAGE

You can select the desired language on Data display screen. You can choose Simplified

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English if your native language is not available among the options.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMMANDER

Selects the control device.

 

 

 

 

 

(page 16)

 

WIRELESS

: Enables the control of Remote Commander.

 

 

 

 

 

 

 

CONTROL S : Enables the control of the remote control unit DSRM-10 (not supplied)

 

 

 

 

 

 

 

 

connected to CONTROL S IN jack. (Remote Commander is disabled.)

Notes

•The unit accepts signals from any Sony Remote Commander whose command mode is set to VTR4, not only the supplied one. To disable the control from any Remote Commander, set this item to [CONTROL S].

•You can also use the DSRM-20 (no longer manufactured: not supplied).

Menus Through Setting and Adjusting 4 Chapter

(Continued)

Chapter 4 Adjusting and Setting Through Menus 53