Icon/Menu | Submenu | Setting |
IN/OUT REC | VIDEO OUT | Selects the mode of video output jacks. |
|
| COMPONENT |
Selects the output format from COMPONENT OUT jacks.
Selects from [480i], [480p/480i] or [1080i/480i] when [60i/50i SEL] in [OTHERS] menu is set to 60i.
Selects from [576i], [576p/576i] or [1080i/576i] when [60i/50i SEL] in [OTHERS] menu is set to 50i.
| DOWN CONVERT |
| ||||
| Selects the setting for down converting images output from analog video jacks when | |||||
| playing back in HDV format or inputting HDV signals from | HDV/DV jack. | ||||
|
| SQUEEZE | : | Maintains the image vertically and horizontally by compressing the | ||
|
|
|
|
| horizontal ratio. Images appear vertically long. | |
|
| LETTER BOX : Maintains the image vertically by compressing the vertical ratio. | ||||
|
| EDGE CROP : Maintains the original image size and crops the left and right edges of the | ||||
|
|
|
|
| images. |
|
|
|
|
|
|
|
|
| Notes |
|
| |||
| • When you play back an | |||||
|
| HDV format with copyright protected signals, COMPONENT OUT jacks will output | ||||
|
| pictures in either 480i or 576i format. |
| |||
| • Regardless of the playback tape or of the format input to | HDV/DV jacks, the selectable | ||||
|
| setting values displayed on this menu vary depending on the setting of [60i/50i SEL]. | ||||
| • WSS (Wide Screen Signaling) is not output, when the picture is output to COMPONENT | |||||
|
| OUT jacks in 480p or 576p. Set the monitor according to the down convert format of the | ||||
|
| picture, which is output from the unit. |
| |||
| • When you play back a tape in DVCAM or DV while an EE picture in NTSC/PAL is | |||||
|
| displayed, the 480i resolution or the 576i resolution is output, regardless of the setting of | ||||
|
| [COMPONENT] in [VIDEO OUT] in [IN/OUT REC] menu. |
| |||
|
|
|
|
| ||
i.LINK SET | Adjusts the down conversion format. This menu is available when [HDV/DV SEL] is set to | |||||
(pages 25, | [AUTO] or [HDV]. |
|
| |||
37)HDV t DV CONV
OFF : Disables down conversion.
DVCAM : Down converts to DVCAM format.
DV SP : Down converts to DV SP format.
DOWN CONVERT
This setting is available when [HDV t DV CONV] is set to [DVCAM] or [DV SP]. SQUEEZE : Plays back with compressed horizontal screen image and maintains all
images on display. Images appear vertically long.
EDGE CROP : Plays back with both left and right sides of the screen images cut off and maintains the original image appearance.
Notes
•When [DVCAM] is selected, there are some limitations described below.
–ATN (Absolute Track Number) outputs the value counted in DVCAM format during playback at regular speed (⋅1) or recording of the internal color bars only. During playback at irregular speeds other than described above, ATN outputs the value of a tape recorded in HDV format.
–When the unit is playing back at regular speed (⋅1) while detecting a blank portion on the tape, the unit counts the blank portion as ATN formatted in DVCAM.
–When using the duplicating function that is equipped with a device such as the
–Please note that a duplicated tape and the source tape recorded in HDV format with [DVCAM] selected do not share the same ATN (Time code value is displayed correctly).
•When you change the video format setting of [DOWN CONVERT] of [i.LINK SET] in [IN/ OUT REC] menu, the video signal output from COMPONENT OUT jacks, S VIDEO jack, or VIDEO OUT jack may be distorted for a moment.
•Before changing your setting, be sure to disconnect the i.LINK cable. If you change the setting while i.LINK is connected, the video device may not recognize the new setting.
(Continued)
Menus Through Setting and Adjusting 4 Chapter
Chapter 4 Adjusting and Setting Through Menus 47