Auto Repeat

The unit can repeat the playback of all or a part of the tape.

1 Set [AUTO REPEAT] in [VTR SET] menu to [ON].

2 Press REW button (if the tape is already rewound, press PLAY button).

The unit rewinds the tape to its beginning, and starts playback automatically. When the following items on the tape are searched, AUTO REPEAT playback starts automatically.

Index signals

A portion unrecorded

A portion recorded in the format set by other than [AUTO] in [HDV/DV SEL] in [IN/OUT REC] menu

Tape end

Auto Repeat using an external AC timer

If you connect an external AC timer (not supplied) to the unit, you can repeat playback automatically at the preset time.

1 Connect the unit to an external AC timer to the unit.

DSR-M15 (real panel)

AC adaptor

AC timer

to a wall outlet

2 Set [AUTO REPEAT] in [VTR SET] menu to [ON].

s is displayed on the Data display screen (page 18).

3 Set the starting time on the external AC timer.

At the preset time, the power of the unit turns on, and after a few seconds (no more than 30), Auto Repeat playback starts automatically. When the following items on the tape are searched, AUTO REPEAT playback starts automatically.

Index signals

A portion unrecorded

A portion recorded in the format set by other than [AUTO] in [HDV/DV SEL] in [IN/OUT REC] menu

Tape end

Notes

The unit cannot search for an unrecorded portion for 20 seconds at the beginning of the tape until it searches for the next unrecorded portion throughout the tape.

While a tape is running, be sure not to turn off the power by using an AC timer. The unit and the tape may be damaged. When turning off the power of the unit, make sure to press STOP button on the unit first to stop the tape transport, then turn off the power.

The editing software used on the digital non-linear editing system may mark an index signal on a tape itself. Therefore, if you use a tape on which signals transmitted from a digital non-linear editing controller are recorded or a copy tape made from one, using digital dubbing, Auto Repeat may not be performed correctly.

To stop Auto Repeat

Press STOP button on the unit.

To release the Auto Repeat mode

Set [AUTO REPEAT] in [VTR SET] menu to [OFF].

Recording and Playback 2 Chapter

Chapter 2 Playback and Recording

31