Basic Operations
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
BD/DVD 101 (Sony Blu-ray Disc Player)
DVWVCR 901 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
Follow the steps below to program your TV's remote control to operate non-
Sony video equipment.
_"'S
Find the three-digit code for your equipment fi:om the Manufacturer ._
Codes" listed on page 27. If more than one code number is listed, tl-y
entering from the code listed first.
] SAT,CABLE
Press and hold the _,..........._ or _ FUNCTION button you want to
program on the relnote control and press the _ button simultaneously.
The selected FUNCTION button (BD/DVD, DVR/VCR or
SAT/CABLE) will flash.
[] Enter the three-digit manufacturer's code number using the @-(_)
buttons while the FUNCTION button is lit. If the code is not entered
within 10 seconds, you must start again fioln step 1.
[] Press the (_) button while the FUNCTION button is lit.
When the programming is correct, the selected FUNCTION button
blinks twice, and when not, blinks five times.
To check if the code works
Aim your TV's remote control at the equipment, and press the green _:5
button. If you can turn the equipment on and off by using the remote control,
then the programming is complete. If not, try the next code listed.
26