Other Information
Sound
Good picture, no sound [3 Press MUTING so that Muting disappears from the screen (see page 24).
[3 Make sure the Speaker option is set to On in the Sound setting (see page 38).
[3 Make sure the MTS option is set to Stereo or Mono (see page 37).
[3 When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise [3 Make sure that the antenna is connected using the 75-ohm coaxial cable.
[3 Keep the antenna cable away from other connecting cords.
[3 To avoid TV interference, make sure to use an undamaged antenna cable.
Cannot gain enough volume [3 Increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press TV (FUNCTION) once (the TV indicator lights tip) and adjust the TV's
volulne.
Sound seems weak or [3 The TV's audio might be set to Auto SAP or Mono, when it might be better set to
insufficient Stereo. In the Sound setting (see page 37), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on [3 If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external speakers order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 38). Or, to use the TV remote control, set the Audio Out
option to Variable.
[3 To turn on the TV speakers, set the Speaker option to On (see page 38).
No audio for HDMI [3 Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.
0
o
Channels
Cannot receive upper channels [3 Press ANT to select the VHF/UHF input (see page 22).
(UHF) when using an antenna [3 Use Auto Program in the Channel setting to acid receivable channels that are not
presently in the TV's memory (see page 41 ).
Cannot receive any channels [3 Use Auto Program in the Channel setting to add receivable channels that are not
when using cable TV presently in the TV's memory (see page 41 ).
[3 Press ANT to select the CABLE input (see page 22).
Cannot receive or select [3 Use Auto Program in the Channel setting to acid receivable channels that are not
channels presently in TV memory (see page 41).
Some digital cable channels are [3 Certain cable companies have limitations on the broadcast of digital cable
not being displayed channels. Check with your cable company for more information.
[3 The digital cable channel may be set to Hidden in the Channel setting (see page
41).
57