Sony KP-43T70C, KP-61SV70C, KP-53SV70C service manual Watching the TV

Using Your New Projection TV

Watching the TV

Many TV features can be accessed directly through the remote control. The following chart will explain the function of some buttons found on your remote control.

Using the White Labeled Buttons for Projection TV Operations

MAIN POWER	Switches the projection TV on and off.
(on the right side
of the projection
TV)
TV (FUNCTION)	Activates the remote control for use with the projection TV.
TV POWER	Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,
	VIDEO 2) appears on the screen, press TV/VIDEO until a channel number
	appears.
0 - 9	Use for direct channel selection. Press 0-9 to select a channel (for example,
and ENTER	to select channel 10, press 1 and 0). The channel will change after 2
	seconds, or you can press ENTER for immediate selection.
CH +/–	Press to scan through the channels (+ up or – down).
	Speed Surf
	1 Press and hold CH + or – to change the channel number rapidly.
	2 Release to display the desired channel.
VOL +/–	Press to adjust the volume (+ up or – down).
MUTING	Press to mute the sound. “Suprimir el sonido” will appear on the screen and
	will dim three seconds later. To restore sound, press again or press VOL +.

1 4

Using the White Labeled Buttons for Projection TV Operations

TV/VIDEO	Press repeatedly to scroll through available video inputs:
	TV, VIDEO 1, VIDEO 2 and VIDEO 3.
	If you select “Omitir” as a “Etiqueta de video” in the Ajustes menu, your
	projection TV will skip the video input you selected. (see “Etiqueta de video”
	on page 29)
JUMP	Press to alternate or jump back and forth between two channels. The
	projection TV will jump between the current channel and the last channel
	selected using the 0-9 buttons.
FREEZE	This is useful when you need to copy down information that appears on the
(yellow labeled	TV’s screen.
button)	Press to freeze the desired picture. The frozen picture is displayed in the
	window picture while viewing the normal picture of the current channel in the
	main picture.
	6
	Normal motion
	picture
	Frozen picture
	R e c e t a
	harina - - - - 2
	a z ú c a r - - 1/2
	s a l - - - - - - 1/2
	mantequilla - 1
	To change the location of the window picture, press V, v, Bor b.
	Press FREEZE again to display the normal picture.
DISPLAY	Press to display the channel number, current time, channel caption (if set),
	and MTS/SAP mode (if SAP is selected). The SAP indication disappears and
	the other indications dim three seconds later.
	To turn the display off, press DISPLAY again.
	(continued)

– 14 –

PICTURE MODE

Press PICTURE MODE repeatedly to directly choose one of five different video modes that best suits the program you are watching.

Vívido: Select for enhanced picture contrast and sharpness.

Estándar: Select to display a standard picture for normal viewing environments.

Películas: Select to display a finely detailed picture for low light environments.

Personal 1, Personal 2: Select to customize the “Ajuste de imagen” of the Video menu according to your personal preference.

When you select “Películas,” “Personal 1” or “Personal 2,” you can also perform the “Ajuste de imagen” (such as “Brillo,” “Color,” etc.) to suit your taste. For details, see “Modo” on page 20.

REFER TO THE

ILLUSTRATIONOFTHE

REMOTE CONTROL ON THE

INSIDE FRONT COVEROF

THIS MANUAL AS YOU

REVIEWTHISCHART

1 5