Registration Adjustment, Setup for Adjustment

3-10. REGISTRATION ADJUSTMENT

5.	Press 6 to display the test signal (crosshatch) on the screen.
6.	Select GRN CENT(*) with the 1 and 4 keys on the remote
	commander and check that the adjustment data is now “000”

MUTING

Category up

DISPLAY

Data up

(Rough adjustment) PJED mode Color change GRNnBLUnRED

both vertically and horizontally.

•Current flow in circuit should be stable before attempting adjustment. So wait 5 minutes after turning on the TV power.

1.Set to the service mode by pressing quickly keys on the remote commander in the standby mode in the following

(SCREEN DISPLAY)

*: In the factory preset, “GRN CENT” appears on the screen first. In case of other colors “RED” or “BLU”, change color by every pressing 3 key.

7.Set VPNT 28 RON to “000”, 29 GON to “001” and 30 BON to “000” to show only the green color.

8.Change the VPNT mode to the PJE mode.

SUB DEFLECTION ADJUSTMENT ITEM
Adjustment	O : Yes	– : No

				Adjustment type

Display	Adjustment item		G		R	B
			H/V		H/V	H/V

CENT	CENT		O/O		O/O	O/O

SKEW	SKEW		O/O		O/O	O/O

SIZE	SIZE		–/–		O/O	O/O

LIN	LIN		–/–		O/–	O/–

KEY	KEY		–/–		–/O	–/O

PIN	PIN		–/O		–/O	–/O

2.Change TV mode to the video input mode.

3.Change the VPNT mode to the PJE 00 FDIS.

4.Set FDIS data to “01” to display the registration data of each spot in the fine adjustment.

PJE 00 00

FDIS

– 35 –