4 Press STANDBY.
The CD player pauses for playing and the deck pauses for recording.
5 Press START.
The deck starts recording and the CD player starts playback.
The track number and elapsed recording time of the track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you press START on the remote of the deck. Press Pon the remote of the CD player instead.
Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.
3
0 )
STOP
P = +
CD PLAYER P
1 Set the source selector on the amplifier to CD.
2 Do Steps 2 to 5 in “Recording on an MD” on page 8 to prepare the deck for recording.
START
· P p
= + r
By connecting your deck to a Sony CD player or Hi-Fi Component System, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your deck is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as appear on the original even when “T.Mark Off” is selected in T.Mark Menu. If your deck is connected to a Sony CD player by audio connecting cords through the LINE (ANALOG) IN jacks, track numbers are automatically marked when you set T.Mark Menu to “T.Mark LSync” (see page 14).
As the same remote controls both the CD player and the deck, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this deck.
6
STANDBY
Recording on MDs
By using the MUSIC SYNC button on the remote, you can automatically start recording in sync with the signal input from the program source.
The method of marking track numbers differs, depending on the program source being recorded (see “Notes on Recording” on page 11).
6
· P p
=+ r
0)
MUSIC SYNC
1Do Steps 1 to 5 in “Recording on an MD” on page 8.
2Press MUSIC SYNC.
The deck changes to recording pause.
3Start playing the program source you want to record.
The deck starts recording automatically.
To stop Music Synchro-Recording
Press p.
Note
When Music