Sony MDS-PC1 34EN, To cancel title copying, Copying a track or disc title, If “Overwrite?” appears in the display, Labeling tracks and MDs with the remote

Editing Recorded MDs

Copying a track or disc title

You can copy a track or disc title to use it as a title of another track or the disc title within a disc. Note that you can also do this operation by using the controls on the remote.

1Press EDIT/NO to display “Edit Menu”.

2Turn AMS (or press =or +) until “Name ?” appears in the display and press AMS or YES.

3Turn AMS (or press =or +) until “Nm Copy ?” appears in the display.

4Press AMS or YES.

5Turn AMS (or press =or +) to select “Disc” to copy the disc title, or the track whose title you want to copy and press AMS or YES.

If “No Name” appears in the display

The disc or the track has no name.

6Turn AMS to select “Disc” for disc title or to specify the track number to copy a title, and press AMS or YES.

“Complete!!” appears for a few seconds to indicate that the copying operation is completed.

If “Overwrite?” appears in the display

The disc or track you selected in Step 6 above has a title. If you continue the title copying, press AMS or YES.

To cancel title copying

Press EDIT/NO or p.

Labeling tracks and MDs with the remote

Z

6

Alphabet/number buttons

NAME CLEAR

·￿	P p	p
CHAR	r	NUM
= +

0/) 0 )

1Press NAME repeatedly until a flashing cursor appears in the display, then do the following:

To label	Make sure that the deck is
A track	Playing, pausing, recording the
	track to be labeled, or stopped after
	locating the track to be labeled
An MD	Stopped with no track number
	appearing in the display

2Select the character type as follows:

To select	Press
Uppercase letters	CHAR repeatedly until “Selected
	ABC” appears in the display
Lowercase letters	CHAR repeatedly until “Selected
	abc” appears in the display
Numbers	NUM repeatedly until “Selected
	123” appears in the display

3Press an alphabet/number button to enter a character.

After you enter a character, the cursor shifts rightward and waits for the input of the next character.

You can change the character type at any time during Step 3 (see Step 2).

34EN