Sony MDS-PC1 Playing an MD, 10EN, Press, for MD deck, Insert an MD, Press fl(or ·), The STANDBY indicator turns off

Basic Operations

Playing an MD

23 4

Adjust the headphone volume.

Connect the headphones.

STANDBY				§￿	fl￿ p		r
					=AMS +
PHONE LEVEL		TIMER		EDIT/NO	YES	PUSH ENTER
		REC OFF PLAY
		DISPLAY/	)
		CHAR
MIN	MAX			REC MODE	INPUT
PHONES		CONTROL A1				REC LEVEL
				STEREO MONO	DIGITAL ANALOG
		PLAY MODE	0
						0	10

When “REMOTE” appears in the display

The deck is set to be operated from the connected personal computer. You cannot operate the deck from the buttons on the front panel or remote.

To use the buttons on the front panel or remote, quit the MD editor application, turn off the deck, then turn it back on.

zYou can locate and play back a track in Step 4

1Turn AMS (or press =or +) until the number of the track you want to play appears.

2Press AMS or fl(or ·).

1	Turn on the amplifier and set the source selector to the position
	for MD deck.
2	Press	.
	The STANDBY indicator turns off.
3	Insert an MD.

With the label side up

With the arrow pointing this way

4	Press fl(or ·).
	The deck starts playing. Adjust the volume on the amplifier.
To		Do the following:
Stop playing		Press p.
Pause playing		Press fl(or P). Press the button again to resume
		playing.
Go to the next track		Turn AMS clockwise (or press +on the
		remote).
Go to the current track		Turn AMS counterclockwise (or press =on the
or the preceding track		remote).
Take out the MD		Press §after stopping playing.

10EN