Sony MDS-PC1 13EN, Recording Over Existing Tracks, Playing back tracks just recorded, To play from the first track of the MD after recording

Recording on MDs

Notes

•When you turn off the Smart Space Function, the Auto Cut Function is also turned off automatically.

•The Smart Space Function and Auto Cut Function are factory set to on.

•If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting (On or Off) of the Smart Space and Auto Cut Functions the next time you turn on the deck.

Playing back tracks just recorded

Do this procedure to immediately play back tracks that have just been recorded.

Press fl(or ·) immediately after stopping recording.

Playback starts from the first track of the material just recorded.

To play from the first track of the MD after recording

1Press pagain after stopping recording.

2Press fl(or ·).

Playback starts from the first track of the MD.

Recording Over Existing Tracks

Follow the procedure below to record over existing material just as you would on an analog cassette tape.

§￿ fl￿ p r 6

=+

)

0

=AMS +

·￿ P p

=/+ = + r

0 )

1Do Steps 1 to 5 in “Recording on an MD” on page 8.

2Turn AMS (or press =or +) until the number of the track to be recorded over appears.

3To record from the start of the track, continue from Step 6 in “Recording on an MD” on page 9.

zWhile “TRACK” flashes in the display

The deck is recording over an existing track, and stops flashing when it reaches the end of the recorded portion.

zTo record from the middle of the track

1After Step 2 above, press fl(or ·) to start playback.

2Press fl (or P) where you want to start recording.

3Continue from Step 6 in “Recording on an MD” on page 9.

Note

You cannot record from the middle of an existing track when the “PROGRAM” or “SHUFFLE” is on.

13EN